In a small bowl, use about 1/2 a tablespoon (10 grams) of baking soda and just enough water to create a thick paste. Remove the jewelry from the water and scrub each piece with a soft-bristled brush, like a toothbrush. The baking soda and brush will reach those tiny crevices, and it'll also make your pieces brighter.
You can safely clean jewelry with baking soda. Baking soda is indeed an excellent DIY cleaner that can be used to clean various types of jewelry, including precious metals like gold and silver, as well as gold-plated, silver-plated, and even costume jewelry.
Baking soda is abrasive, which is why it's great for cleaning sinks and toilets, but that abrasive quality can scratch gemstones and precious metals. So steer clear when it comes to cleaning jewelry.
Gold is an extremely soft metal and baking soda is an abrasive cleaner, says Franco. It will scratch ruin the finish and cause the plating to wear off.
The short answer is no. Toothpaste is not a good option for cleaning your ring. Toothpaste contains scrubbing particles to polish your teeth, but these particles are often harder than the metals in your ring, especially gold or white gold. Using toothpaste on your jewelry could cause scratches or pitting in the metal.
Mix 1/2 cup vinegar and two tablespoons of baking soda in a small bowl. Allow your jewelry to soak in the white vinegar and baking soda solution for a few hours. Then, rinse the jewelry with clean water and pat dry with a cotton cloth before storing your pieces away.
Are you looking to get that white metal glow back? This is not something you can fix at home. There's no other way around it - your white gold jewelry will have to be re-plated to get that platinum shine again.
To maintain your white gold wedding ring, nothing easier than using some soapy water at 40 degrees celsius. Soak the jewel into the water for around 15 minutes, then brush it with a small soft brush.
Does Coke Clean Gold? This is a handy and maybe unexpected tip, but Coke does indeed clean gold. You can dip your gold in a small bowl of Coke and make sure that it is completely covered. Leave the gold plated jewelry in the solution for 10 minutes and then rub with a soft cloth and rinse.
What Causes Discoloration In White Gold? When you see a yellowish tint in your white gold jewelry, it's not because of poor quality. Instead, you see the inner layer of gold alloy under the rhodium plating. Because rhodium is applied in such a thin layer, usually only a few microns thick, it can wear off over time.
There's nothing you can do to "clean" the yellow away. Fortunately, getting new rhodium plating on your white gold ring is simple. Just take it to your jeweler and they'll re-plate it for you by dipping it in rhodium. If you purchased a warranty on your ring, they'll usually do it free of charge.
Don't swim while wearing white gold as the chemicals in the water (chlorine) can react with the plating. Remove white gold items when bathing and sleeping. Keep your white gold away from other metals. For example don't wear a yellow gold ring next to a white gold ring, as the plating may rub off quicker.
You will need a bowl, mild washing up liquid or soap, warm water, a soft toothbrush, a microfibre towel and some baking soda. We recommend using a professional Connoisseurs Jewellery Cloth for optimum results, but a microfibre towel is your second best option.
Never use toothpaste, baking soda, or a commercial metal cleaner on gold. If you use these abrasives, you may scratch the gold. Never use bleach. Bleach reacts with gold and will eat away at gold alloys.
Vinegar. Cleaning your gold and gemstone jewelry couldn't be easier with white vinegar. Simply drop the jewelry into a jar of vinegar and let sit for 10 to15 minutes, agitating occasionally. Remove and scrub with a soft-bristled toothbrush, if necessary.
It is a common myth that toothpaste is a good way to clean your jewellery. This is actually false. Toothpaste can damage your diamonds, gemstones, gold and silver. Toothpaste is abrasive and has a hardness of around 3/4 on the Mohs Scale of Hardness.
Mix mild dish soap with warm water to soak your white gold.
Use about 1 teaspoon (4.9 mL) of mild dish soap and 1 to 2 cups (240 to 470 mL) of warm water. Stir the water with your fingers or a spoon to make the water bubbly. The warm water and soap will gently dislodge any dirt or grime on your jewelry.
Cleaning gold-plated and white gold jewellery
Gold-plated jewellery can be cleaned with a mild dish soap soak, but should not be scrubbed or rubbed with anything abrasive. All colours of gold, including rose gold and white gold, can be cleaned the same way.
When you see a yellow sheen on your white gold jewelry, it is not the result of oxidation or another chemical reaction, meaning the metal does not actually change color. The outer layer of rhodium slowly wears away over time, eventually revealing the creamy-yellow color of un-plated white gold.
Salt and baking soda are a surprisingly effective combination for cleaning gold. When combined, they create a chemical reaction that helps break down tarnish. Use equal parts of each — say, one tablespoon salt and one tablespoon baking soda — as well as a drop or two of dish soap if you'd like, Martin says.