Most grout is made of sand and is porous, therefore things like dirt, debris, soap scum, and water get ground into the grout. All this can lead to the growth of bacteria, mold, and mildew, which is why your grout looks stained. Even if you seal your grout, that can wear down over time.
One of the most common causes for discolored grout is dirty mop water. Rather than cleaning the tile, mop water spreads the dirt from the tile into the grout. Since the grout is the lowest part of the floor, the dirt and grime from the mop water settles into the grout.
You can apply new grout right over the top of the old grout. To do this, all you need is a grout removal tool. Use the tool to strike out the old grout, making sure the depth is at least 2mm, which is about the thickness of two dimes stacked one on top of the other.
The likely cause for dirty-looking tiles is not using clean enough water while cleaning the floor. The water in your bucket must be changed frequently to clean the floors.
What do professionals use to clean grout? Whether you believe it or not, most professionals use a solution of white vinegar and water with a 1:1 ratio. This solution is often more effective than dedicated Ph-neutral grout cleaners.
Grout doesn't last forever. You can expect a lifespan between eight and sixteen years. Its lifespan will vary depending on how you treat your shower. Odds are, you have no idea when your grout was installed.
Dark color grout is notorious for trapping moisture, making it more prone to mold development. High humidity and water leaks from your faucets create conditions that encourage the growth of mold. A professional should inspect your grout and make a recommendation based on its condition.
Start by decanting a 1:1 solution of water and vinegar into a spray bottle. Spritz all over the area, aiming for the grout and any problem spots. Let it sit for 5 minutes before scrubbing in a circular motion with a grout brush or an old toothbrush.
Yes that beautiful black grout of yours, oh no! Your tile and grout dries with the detergent, dirt, and water mixture on it, leaving the most enchanting residue behind. This residue is a remnant of the detergent in the mixture.
Mix together ½ cup baking soda, ¼ cup hydrogen peroxide, 1 tsp dish soap. Spoon cleaning agents onto grout and let sit for 5-10 minutes. Scrub the grout lines with a brush. Grout cleaning tip: Make sure to scrub hard to agitate the grout and cleaning solution and break up any really stuck dirt.
The primary reason why grout deteriorates is that it was not mixed and installed properly. If too much water is added to the grout at install, it will not seal with the required density to withstand prolonged exposure to moisture and (most of all) water.
Cleaning Grout with Vinegar
Distilled white vinegar is a safe, natural cleaner and disinfectant you can use all around the house. Pour or spray undiluted vinegar onto your grout and let it sit for 10 minutes before using a toothbrush, scrubbing in a circular motion. Next, rinse away the dirt and mildew.
How Often Should I have Kitchen Tile and Grout Cleaning? I recommend cleaning the kitchen area professionally once per year. A good impregnating sealant will help keep the grout cleaner longer and allow for easier cleaning on an annual basis.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
At this point you may wonder if a complete re-grout is necessary or if it would be possible to simply put new grout over old grout. The answer is, yes, it is possible to put new grout over old grout.
For light discolouration, dip a toothbrush into a solution of one-part water to one-part bleach and use it to scrub along the grout. Leave for a few minutes and then rinse with water. For heavier staining, make a stiff paste of bicarbonate of soda and distilled white vinegar.
Seal Grout
You can seal your grout to prevent mold and mildew. Reseal your grout to prevent mildew by keeping the water out. An annual sealing will be enough to keep your home mildew-free.
To keep water and soap residue from penetrating the pores of your bathroom tile and grout, have them professionally sealed. By applying a sealer, you create a protective barrier over the surface of your tile. This inhibits mold growth by keeping moisture and the organic materials needed to feed mold from collecting.
If you haven't kept up with grout maintenance, the once-white grout lines between your ceramic tiles may now appear gray, brown, or black. This discoloration is an accumulation of dirt, food particles, and—in the case of shower tile grout—mold.
Moisture and direct water contact contribute to grout deterioration over time, and eventually, the tiles will crack. This is why you should consider regrouting shower tiles every six months.
For high-traffic areas, like the main bathroom, you should consider sealing it every six months, while low-traffic areas like the guest bathroom can be resealed every two years. If you are using epoxy grout, it might not be necessary to reseal it as it is highly water-resistant.
Regrouting can be a worthwhile home improvement project that keeps your floors looking good as new. It makes your tiles more resistant to mould, prevents water from seeping behind the shower floors and walls, and ensures they have a longer life span.