Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
Undiluted white vinegar in a spray bottle is the best all-around mold remover for shower grout. Spray the grout, and let the vinegar sit for at least one hour. Rinse with fresh water, and wipe down the walls.
For really tough black mold removal, mix two parts baking soda with one part white vinegar and one part water. Stir the mixture until it becomes a thick paste. Spread your mixture liberally onto the surface and let it dry. Scrub away the black mold and stains, and wipe down with water.
So, how do you clean grout with vinegar and baking soda? Apparently, vinegar is a popular natural household cleaner, but it's too acidic for cleaning grout. In fact, the acetic acid in vinegar can corrode the grout over time, so you might want to avoid using it for cleaning in this case.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
While it is possible to use bleach to kill mold as well, experts agree that vinegar is a much better option. Unlike bleach, vinegar can effectively kill the mold at the root, which means it's less likely to return. Vinegar is also less toxic than bleach, making it a better choice for household use.
The dark spots on grout are most likely the result of mold, mildew or plain old dirt buildup.
Mix one cup of bleach in a gallon of water, apply to the surface and don't rinse. Mix a 50/50 solution of ammonia and water. Spray on the surface, wait two to three hours, then rinse. Never mix ammonia with bleach or other all purpose cleaners; this will create toxic and dangerous fumes.
Mold on tile grout is unsightly, to say the least. It is typically caused by bacteria (that we all have growing in our bathrooms) combined with the hot, humid environment that our bathrooms provide, especially post-shower or bath.
One way to clean and whiten the grout is by use of hydrogen peroxide and baking soda. Mix the two ingredients to create a thick paste. Then, using a brush, spread the paste on the mold-affected grout and let it work for 5-10 minutes.
Rub a paste of white vinegar and baking soda into mouldy areas. Scrub at heavy stains with a stiff-bristled brush or reapply the paste. Rinse with a cold, wet sponge and dry with a microfibre cloth. Spray any mould on bathroom sealant with bleach and water to kill mould spores.
Remove mould: Pour some alcohol or vinegar onto a cleaning cloth and wipe it over the mould stains until they disappear. In the case of stubborn mould, you can leave the product to work for a little while. Then wipe the surface with clean water and dry it thoroughly.
Using a soft cloth or toothbrush, work the vinegar-covered mould in circular motions until it starts to come away. Clean and wipe afterwards. If the mould seems stubborn, mix the vinegar with enough bicarbonate of soda to make a thick paste and apply again, leaving overnight and repeat the removal process.
To remove the black stains that mold leaves on non-porous surfaces like grout, mix equal parts of bleach and water in a spray bottle and spray it over the stained area, allowing it to sit for several minutes. Return and spray the area again, and use a scrub brush to scrub out any remaining discoloration.
We highly advise against using ammonia or bleach to clean any grout. Cleaning solutions that contain bleach or ammonia will not only work to erode your grout over time, they will cause your grout to become even dirtier by leaving a film behind, which attracts dirt.
You can also use white vinegar for chemical-free grout cleaning. Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes. Then, scrub with a small brush or old toothbrush.
Avoid Vinegar and Baking Soda
Vinegar and other acids are also a bad idea for stone tile because the acid can etch the stone. Another widely praised household cleaner, baking soda, is alkaline (not acid), but it is not very effective as a grout cleaner.