According to Fixr, the average toilet valve repair cost is between $75 and $200 to replace a flush valve or up to $400 to fix a constantly running toilet.
However, the good news is that replacing your toilet fill valve is something any homeowner can do. It does not take a lot of experience with plumbing or a lot of time. However, you do need a few parts, a couple of tools, and a little bit of effort.
Most do-it-yourself homeowners can handle this project in about 60 minutes. All you need is the most basic understanding of how toilets work, a replacement fill valve kit, and the instructions above.
What is the average cost for a new toilet? The cost of a new toilet varies widely depending on the brand and features, but typically averages $200 to $500. Professional installation will increase the total cost to around $400 to $800.
Toilet Parts
The toilet's flush valve will typically last 6-7 years. A toilet fill valve might only last four to five years. In general, you should expect to replace the parts in your toilet every so often while keeping the actual bowl in place.
To detect a slow leak watch the How to Detect a Leaky Toilet video or follow these steps: Put 10-15 drops of food coloring or a dye tablet in the toilet tank. Wait 30 minutes without flushing. After 30 minutes, if the water in the bowl turns color, your toilet tank is leaking.
If you're planning on replacing your toilet anytime soon, then save the money on the repair and replace the toilet instead. This will save you money in the long run, even though it will be a bigger expense up front.
The average toilet installation cost in Australia is between $300 – $400. The price can be lowered if replacing a toilet is at a basic level, from $150 – $250. Buying a new toilet can increase the price to over $500, a more expensive toilet can increase this drastically.
Toilets can last for up to 50 years under average conditions. However, this doesn't mean that you won't need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.
A broken fill valve will allow too much water to enter your toilet's tank, increasing the amount of water that you send down the drain with each flush. You can spot a faulty fill valve by listening closely to strange sounds that might be coming from your toilet.
Wiggle the Valve: If the shutoff valve turns only partially, it won't completely stop the flow of water. Try moving the valve clockwise and counterclockwise. Wiggling it back and force may eventually allow you to turn it smoothly. Use Hot Water: Cold metal parts may be more difficult to move.
Fixing a toilet fill valve (once referred to as a ballcock) is relatively easy to repair if you have a standard Fluidmaster brand valve. Often, a fill valve is repaired by simply replacing the entire fill valve, but Fluidmaster fill valves can be corrected by just replacing a seal inside the unit.
This can happen if there's mineral or debris buildup as mentioned above. However, it can also occur just because your fill valve is faulty or even because it's old and worn out. Although your toilet itself may last for decades or more, the fill valve may only last a half-dozen years before it needs replacement.
In essence, that depends on your skill level and experience, plus the type of toilet you have. If you've done this before, it should be a piece of cake. However, if it's your first time, and depending on the complexity of the job, it could take anything from one to four hours on average.
It's not too difficult to replace your old toilet, as long as you can connect it to an existing branch of the soil pipe. But if you want to add a new toilet in another part of your home, you should get a professional plumber to connect into the main soil pipe.
Plumbing and drainage works are permitted only by licensed plumbers in accordance with The Australian Plumbing Code (PCA). This means that you need a licensed plumber to handle any work dealing with the plumbing or installation of drinking water systems.
According to the Energy Policy Act of 1992, toilets installed after 1994 must have a flush volume of 1.6 gallons per flush. Toilets manufactured before this policy went into effect used between 3.5 to 5 gallons. The bottom line on aging toilets? If you know your toilet is at least 25 years old, consider replacing it.
For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that's 20 years or older.
You can measure the existing toilet to get a good idea of the current size that is installed, but you don't need to choose a toilet that is the exact same size as long as it fits comfortably in the space. Next, measure from the wall behind the toilet to the center of the bolts at the base of the toilet.
According to Fixr, the average toilet valve repair cost is between $75 and $200 to replace a flush valve or up to $400 to fix a constantly running toilet. This includes the cost of the plumber's time for the toilet repair and the cost of the toilet parts.
While leaky sinks and pipes can cause damage to your home, there's a vast difference between a tiny leak that's dripping and a considerable leak that quickly fills buckets of water. A large volume of leaking water is generally considered a plumbing emergency.
If your toilet bowl is leaking, it's smart to turn off the water at the shutoff valve. You will usually find it behind your toilet. This will stop any water flow to the toilet and keep you from wasting water until you can get the leak fixed.