A Starlink router can technically support a large number of devices, with the latest models handling up to 235 or more in specifications, while Gen 1/2 models support around 128; however, performance drops significantly with many active users as bandwidth is shared, so for high device counts (e.g., 40+), using a third-party router in Bypass Mode is recommended to manage more IPs and better network traffic.
Yes — during peak network times, speeds may temporarily decrease. This slowdown can occur when many users are online simultaneously. Starlink dynamically manages network traffic to optimize performance for all customers, but you may still notice reduced speeds during these periods.
Using Starlink Roam in an available country different from your shipping address (marked "Available") for over two months, may require you to update your registered address to your new location or else service will be restricted.
Few barriers: The best connection will be when your router is in the same room, or about 1-2 rooms away. The thinner the wall, the further the signal can go.
Starlink Standard Kit covers up to 297 m² (3,200 ft²), can endure extreme weather and environment elements, and comes with everything you need to get online in minutes.
The Starlink WiFi router stands out by offering dual bandwidth (2.4 GHz and 5 GHz), allowing it to support 128 devices simultaneously. This dual-band capability ensures a faster and more reliable connection for a wide range of devices.
Turn on every device that uses the internet at the same time, and check load times for an internet search. This will help determine the router's overall capacity. A slow and sluggish load time response most likely indicates router overload.
Line-of-Sight and Signal Obstruction Issues with Starlink
Since the satellites are moving across the sky, the dish must have an unimpeded view to ensure continuous, reliable connectivity. Even small obstructions can lead to signal degradation or loss of service, affecting user experience.
If your neighbors have a Wi-Fi router on the same channel within range of your router or Wi-Fi gateway, it can cause interference.
The SpaceX-owned Starlink service is offering a new Global Roaming service. The price for joining the new plan is $200 a month, not including the one time $599 price tag for the required hardware receiver and other devices.
No Resale or Unauthorized Agency.
You may not resell access to the Services to others as a stand-alone, integrated or value-added service under this Agreement (whether acting as an agent, introducer or in any other capacity), unless authorized by Starlink.
[July 24, 2025, 3:30 PM PDT]
ThousandEyes data indicates that Starlink began experiencing a widespread global outage around 19:15 UTC. Service began to recover at around 21:31 UTC, with most locations seeing recovery by about 21:40 UTC.
Starlink has built significant market share around the world, Farrar said, and users aren't likely to quit just because of the founder's politics. “Once you've got the service and it's running, you're paying every month for it and given there are few alternatives, it's unlikely you'll turn it off,” said Farrar.
How Many Devices Can Connect to My WiFi Network? Typically, most wireless devices can connect up to 255 devices simultaneously from a single access point on your Wi-Fi network. These represent several different computers, phones, tablets, cameras and other equipment and may far exceed the need for a typical house.
How Fast Is Starlink Internet vs 5G? Starlink satellite internet offers download speeds ranging from 50 to 250 Mbps, while 5G networks offer more impressive average download speeds between 50 Mbps and 2Gbps. If 5G is available in your area, it is a much faster wireless internet option.
Checking the connections on your router settings is the easiest way to tell if someone with malicious intent has connected to your router. If you notice any names you don't recognize, remove those connections, as they may be hackers who are spying on you.
Encrypt your network.
To encrypt your network, simply update your router settings to either WPA3 Personal or WPA2 Personal. WPA3 is the newer — and best — encryption available, but both will work to scramble your information.
The Canadian province of Ontario has canceled a C$100 million ($68.12 million) satellite high-speed internet contract with Elon Musk's company Starlink, following through with a vow by the province's premier to cut ties in retaliation for U.S. tariffs imposed on Canada.
When a Starlink satellite malfunctions, it can become a piece of unpredictable debris in an already congested space environment. The satellites have also become an obstacle to astronomers and others who rely on clear night skies and low radio interference for their work.
10 Signs Someone Hacked Your Router
Simply unplugging a router doesn't reset it to factory settings. Unplugging a router is a method of rebooting or restarting it. When a router is unplugged from its power source, it simply turns off and ceases its operations. This action does not erase any configurations or settings stored in the router's memory.
There are a few ways to tell if your WiFi network has more devices connected than it can handle: Your internet connection is slow. This is the most obvious sign that your network is overloaded. If you are experiencing slow internet speeds, it is likely that you have too many devices connected to your network.