"1 cable" to meters depends on the definition, but the common international maritime standard is 1 cable = 1/10th of a nautical mile, which equals exactly 185.2 meters (or about 608 feet). Historically, it varied (e.g., 100 fathoms), but 185.2 meters is the modern standard for navigation.
The cable has a length of 1 meter / 3ft. and is ideal to charge your phone or tablet with out a overlength of cable.
A cable is a unit of distance traditionally used to measure short distances at sea. It is generally considered one-tenth of a nautical mile, which equals approximately 185.2 meters or 100 fathoms. The length of a cable can vary depending on the standard used.
A: According to the On-Site Guide, you can calculate the cable length by dividing the measured resistance by the resistance per meter. For example, using a 2.5 mm² copper conductor with a measured resistance of 37.05 mΩ, and a resistance per meter of 7.41 mΩ/m, the length is approximately 5 meters.
A: This USB-C to Lightning cable is 6.6 feet (2 meters) long.
Is 30 inches equal to 1 meter? 1 meter is roughly 39.37 inches. Since your value is 30 inches, it is 0.7620 meters.
For example, 3 m = 3 x 1000 = 3000 mm. Answer- One metre equals 1000 millimetres. Answer- 9000 mm is the millimetre value of 9 m. (For example, 9 x 1000 Equals 9000 mm.)
It sounds like you are talking about the length of the cable. The . 5m, 1m, and 2m are the sizes of the cable. So 1m means 1 meter long.
Measure the resistance of the entire wire whose length (Z) you want to estimate. 3. Divide the resistance value of the entire wire (Z) by the resistance value of one meter (Y), to estimate the overall length of the wire (X).
A 2m (about 6.6ft) cable is generally not too long for most uses like charging or standard data transfer, fitting within guidelines for USB 3.0/3.1, but longer lengths can sometimes cause signal degradation for very high-speed data or audio, where shorter cables (1m) are often preferred for optimal performance. For general charging and convenience, 2m is great; for top-tier audio or 10Gbps+ data, quality and length become more critical.
Our 16 foot (5 meter) USB cable supports larger rooms and configurations.
This cable is about 3 feet long (about one meter), so you get just the right amount of length for your project.
The difference is in the length. 1m = 3.2 feet 2m = 6.4 feet Apart from that there are no differences.
A cable is a unit of distance traditionally used to measure short distances at sea. It is generally considered one-tenth of a nautical mile, which equals approximately 185.2 meters or 100 fathoms.
1.5 meters, or 4.92125984 feet.
For a 32A circuit, a 6mm SWA cable can typically run up to around 50 metres before voltage drop becomes significant. For longer distances, consider 10mm.
The difference between meter and yard is that the meter is a SI unit of length and a yard is a unit of length. Also, 1 meter is about 1.09 yards.
There are 0.254 meters in 10 inches.