“I used baking soda and enough white vinegar to form a paste, then smeared it all over the surface. “I left it to sit for around 30 minutes and then used a microfibre cloth to wipe it away using circular motions. “I've never seen my toilet seat so clean, it's like brand new.”
Bicarbonate of soda and white vinegar
Apply the paste to the toilet seat and leave it to sit for between 10 and 30 minutes. Scrub the stains, then wipe the toilet seat with a cloth dipped in clean, warm water. If any stains remain, repeat the process. Thoroughly dry the toilet seat to finish.
Toilet seat stains are common and can be caused by product build-up, urine, fake tan, dead skin, mineral deposits and certain cleaning products. The stains can range from orange to yellow to brown or green, depending on the cause of the stain.
Julie Philips added: “I use bicarbonate of soda and white vinegar. Apply the paste to the toilet seat and leave it to sit for between 10 and 30 minutes. “Scrub the stains, then wipe the toilet seat with a cloth dipped in clean, warm water. If any stains remain, repeat the process.
To clean your toilet seat, we recommend using mild hand soap and water. Anti-bacterial hand soap, dish soap, or anti-bacterial wipes are also acceptable – using any of these will preserve your toilet seat's glossy finish. If you use wipes, please make sure to thoroughly dry the ring and cover with a paper towel.
Sharing on a popular Facebook group, the expert - who works at a Reece showroom - said that bleach can “ruin” many toilet seats, leaving irreparable yellow stains.
In the presence of UV light, oxygen in the atmosphere produces carbonyl groups. This changes the color to yellow-brown and the plastic begins to flake away until it becomes useless. Gas fading in polyethylene films and articles is a common problem.
In the sink, add a tablespoon of Dawn, two cups of vinegar, and water. Allow the plastic containers to soak for 15-30 minutes. Use the bristle brush to scrub the containers. Rinse with water and dry.
Some people tend to use chlorine bleach on toilet seats because it's a strong disinfectant. However, due to the skin-on-skin contact associated with your toilet seat, you'll want to use something that's safer, gentler and specialized in removing these tough stains.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Empty the bowl if your toilet is really dirty.
If you haven't cleaned your bathroom for a while (there's no shame in it—we've all been there!) or your toilet is pretty stained, adding vinegar and baking soda to a dry bowl will help give it a deep clean.
The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.
Simply sprinkle baking soda on the stains and scrub with a brush. Use bleach: Bleach is a powerful cleaning agent that can quickly remove stains. However, it should be used sparingly as it can damage the porcelain on toilet bowls. Apply bleach to the stains and let it sit for several minutes before rinsing away.
You can use bleach, baking soda, sodium bicarbonate and white vinegar as cleaning agents for yellowed plastic, and give plastic items a new lease of life, all by yourself.
Here's what to do: Create a baking soda paste and apply it to the yellowed plastic. Mix water and baking soda in a cup or similar container until the solution forms a paste, then apply it to the plastic and let it sit for several hours. Scrub the paste off with a sponge or rag, then rinse well.
Plastic surfaces, such as serving bowls and acrylic bathtubs, are susceptible to yellow streaks when exposed to chlorine bleach for extended periods. Failure to promptly and thoroughly rinse bleach off plastic, such as during cleaning, is commonly responsible for the discoloration.
“When you use WD-40 on your toilet seat, the product starts as a liquid and penetrates the rust particles while dealing with the surface they have accumulated on. “The liquid then evaporates into a gaseous form, loosening the rust from the surface and making it easier for you to wipe it off.
Although lighter in weight than enameled wood toilet seats, plastic toilet seats are durable, strong and long-lasting. They also give you the benefit of finish that resists wear, chips and stains. They offer design options including: A range of colors that harmonize with and complement any décor.
Under no circumstances should bleach be used in the tank of your toilet, as it could corrode the inside of the toilet. The corrosive properties of the bleach can wear away at the internal parts of your toilet, such as rubber seals, and cause leaks or other potentially permanent damage.
Add 1-2 cups of white vinegar to the bowl and leave it in the toilet for 20-30 minutes. After this, gently scrub the walls of the toilet with the brush or sponge and rinse the white vinegar and baking soda away with water. This cleaning method should take care of your stains.
Sprinkle some baking soda over the stained area. Let the shirt sit for one hour. Use the brush to gently scrub in baking soda. Rinse, then machine wash in cold water with your regular laundry detergent for one washing cycle, then dry as usual.
Urine scale and limescale leave visible deposits in the toilet. Whereas limescale is a mineral, urine scale contains several mineral salts. The waste in urine contains phosphorus, potassium, sodium, calcium and magnesium. These substances produce brown or yellow stains in the toilet bowl.