You can use a commercial wood-cleaning product, like Bona or Murphy Oil Soap. Be sure to follow the manufacturer's instructions. You can also make your own cleaner by mixing one part vinegar to 10 parts warm water. Add a few drops of liquid Castile soap.
Manufacturers and industry experts advise against cleaning hardwood floors with water because wood naturally expands when it's wet and can cause your floor to crack or splinter.
Ammonia will damage the surface of your hardwood floors, as will glass cleaner. Steam cleaners are also a no-go, as it can cause cupping in the floors from the residual water and excessive heat used.
Dry-mop at least twice a week using a microfiber head, focusing on corners. Avoid using water to clean your hardwoods, and never wet-mop, as the moisture can damage the material. To avoid staining and cracking, blot up spills immediately with a dry, clean cloth.
Excess water will lead to damage of the floor, and even the subfloor. Do mop a wood floor with a damp mop or cloth. String mops are less common these days, and that's not a bad thing for cleaning wood floors. They can be tough to evenly wring out and use.
Hot water can dissolve over time the luster of your floors finish and penetrates the wood a lot easier than cold.
Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
The best way to clean laminate floors is to use products made especially for them. If you don't have laminate floor cleaner, you can use a teaspoon of unscented clear dish soap in a gallon of water. A teaspoon of baby shampoo in a gallon of water will also work. Be careful not to soak the floors.
If your floor has developed a slight film or waxy buildup on it (which happens over time when the wrong cleaning products are used), you can instead combine a gallon of hot water with a cup of white vinegar. Vinegar, which is a natural cleaning agent, will break down the film without hurting the laminate surface.
Don't use vinegar or baking soda.
Many DIY home cleaning solutions involve the use of vinegar or baking soda, but these are, in fact, the worst things you can apply to your wood floors. They actually damage and dull the polyurethane, which can irreparably ruin them.
Although it may be tempting to deep clean your hardwood floors with a steam mop, don't. “Drastic temperature changes and moisture may warp the wood,” says Steve Stocki, manager of marketing and merchandising at Lumber Liquidators. That's true whether you have solid or engineered wood floors, and for bamboo, too.
Mopping with dirty water usually causes that buildup and dirty appearance, even though it was just mopped. Dirt is added to a mop bucket each time the mop is dunked into the water, if you don't change the water you are just transferring the dirt and grime around the floors through the dirty water.
Mop around the edges first, then move to the middle of the floor, using overlapping, figure-eight strokes. When one side of the mop gets dirty, turn the mop over to the clean side. When both sides are dirty, wash the mop in the bucket; otherwise, you'll be spreading dirt around instead of removing it.
It consists of five steps: 1) removing dry soil, 2) setting up for wet cleaning, 3) wet cleaning, 4) drying, and 5) take down and sign removal. Removing dry soil can be accomplished by sweeping, dust mopping, or vacuuming, depending on conditions and equipment available.
Here's a secret: Tea's tannic acid makes for an excellent surface shine, according to HGTV. Boil a couple of teabags in some water and dump the tea into a bucket. Wring out a rag or mop in the solution and use it to mop the floors.
Diluted vinegar can dissolve the finish that protects the wood and leave it looking cloudy, dull, or scratched. (The same goes for wood furniture.) Follow the manufacturer's cleaning recommendations or pick a cleaner that's made specifically for hardwood flooring.
Use a laminate floor mop, which is a flat mop made of microfiber or other absorbent materials that are designed to mop without excess liquid. Go over your floor with a dry microfiber cloth or dry mop to soak up any remaining water.