In case the matter is more serious plungers do not work anymore and at this point of time plumbers come up with a much stronger instrument known as the toilet auger or toilet snake. This is a cable-like tool that plumbers twist in deep into the toilet to the clog. This is a kind of device to loosen the clog.
A manual drain snake, also known as a plumber's snake or a drain auger, is a small boring tool that rotates slowly as it's physically pushed through a stubborn clog. The terminal end of the device is a corkscrew-shaped hook that is fed into a clogged drain or toilet.
Hot Water and Dish Soap
Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.
When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.
There is only one Drano® product recommended for use in slow-running toilets: Drano® Max Build-Up Remover. It contains microorganisms that break down organic matter in pipes that can slow water flow. (However, it will not open a completely clogged toilet. For that problem, see How to Unclog a Toilet.)
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
If your plunger can't break up the clog, it's unlikely that baking soda and dish soap are going to work. If, after five or so minutes, the plunger isn't working, it's time to call a plumber.
Most plumbers will charge a flat rate for a drain snake, which will likely average between $75 and $500. When it comes to simpler clogs, expect to pay no more than $150, while more extensive blockages that require dismantling the toilet's plumbing could cost between $150 and $500.
Is it okay to leave a clogged toilet overnight? In most cases, you can leave a clogged toilet overnight. However, calling an emergency plumber near you might be warranted if water starts leaking from the pipes. A simple clog likely won't cause this, but an inexperienced homeowner messing with the plumbing could.
Wait until the clog is loose to attempt flushing. Lift up the back part of the toilet and close the toilet flapper. The toilet flapper is what allows water to flow from the toilet tank into the bowl, so by making sure this is securely shut, you can also ensure the toilet won't overflow.
In some cases, it takes more than one dose of bicarb and vinegar to unclog a toilet. So if your first attempt isn't successful, go back to step one and start over. If a repeat treatment is necessary, leave the mixture for 30 minutes so it can really attack that stubborn clog before you add the hot water.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
Pour one cup of baking soda into the clogged toilet, and then chase it with the hot water/vinegar mixture. Leave the volcano mix to do its job, checking in about 30 minutes. In most cases the clog will have come apart, and a simple flush with send it all down the drain. Plus your toilet bowl will be cleaner!
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
Because of its corrosive nature, Drano can cause toilet bowls to crack, PVC pipes to melt or break and the glue that holds pipes together can be eaten away. If any of these things happen, you're going to be left with an inoperable plumbing system and costly repairs.
To unblock a toilet, mix it with white vinegar and water to start a chemical reaction. This mixture is great for cleaning, descaling and removing soap residues. It's also a really effective way of deodorising waste pipes.
Vinegar is safe and milder than caustic cleaners designed for the toilet, and those commercial cleaning agents can eat away the good bacteria in your septic system. To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl.
Baking soda and vinegar – put one cup of baking soda into the blocked toilet and wait two minutes. Afterwards, slowly pour two cups of vinegar and wait a few minutes before flushing the toilet. Dish soap and water – put dish soap, then hot water into the toilet.
Plunging down too hard
In an effort to dislodge whatever is clogging the toilet, many homeowners get overzealous and thrust too hard downward into the toilet with their plunger. A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak.
You'll be forcing water in both directions in the drain, which will effectively loosen most clogs. Stick with it, plunging 15 to 20 times if necessary. Be patient.
Common causes when a toilet keeps clogging include: You have an older model low flow toilet. Items that shouldn't be flushed have been flushed. Too much toilet paper use.