Jewelers use ultrasonic cleaners with high frequency sound waves and chemicals, which create bubbles that latch on to the dirt on the diamond. The high frequency sound waves pull the dirt away from the stone and bring them up to the surface.
With most jewelers, visits to have your ring professionally cleaned is free! While this is often considered a complimentary service, other jewelers or ones you didn't purchase from, may charge you anywhere from $25 to $50.
Jewelers use ultrasonic cleaners with high-frequency sound waves and chemicals to professionally remove dirt off of diamonds. Why not break it down to steps for a better understanding?
While vinegar is slightly acidic and needs to be used with caution on more porous stones, it will do a fabulous job on your diamond ring. Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours.
There are many common cleaning products that people may think are good to clean diamond rings with, but they can actually be quite damaging. Chlorine bleach, abrasives (like toothpaste or baking soda), or acetone should never be used on any jewellery.
Jewelers use ultrasonic cleaners with high frequency sound waves and chemicals, which create bubbles that latch on to the dirt on the diamond. The high frequency sound waves pull the dirt away from the stone and bring them up to the surface.
Vinegar & Baking Soda
Start by pouring 1/2 cup white vinegar and 2 tablespoons baking soda into a shallow bowl. Mix the solution until the baking soda is completely dissolved. Then, soak your diamond ring in the solution for two to three hours. Rinse your ring under cold water and dry thoroughly with a soft cloth.
Refraction and dispersion are the reasons why the light ray travels through the diamond. Diamond acts like a tiny complicated prism through which the light ray travels at different angles and gives a shiny appearance.
Mix 1 teaspoon dishwashing liquid and 1 cup warm water. Add 1/2 teaspoon of ammonia based household cleaner (like a glass cleaner such as Windex) Soak your jewelry in the solution for about 5 minutes & then gently scrub with a soft-toothbrush. Air dry or carefully towel-dry with paper towel or regular cloth.
Yes, ultrasonic cleaning is one of the safest and gentlest ways to clean jewelry. It uses microscopic bubbles that implode and produce tiny vibrations. This wave of energy, in turn, removes even the tiniest of dirt particles from the nooks and crannies of your jewelry.
The best way to clean your diamond jewelry and restore its sparkle is to: Spray a soft-bristled toothbrush with Windex and gently brush diamond jewelry thoroughly, removing any dirt on the surface of the diamond or dirt that has settled in and around the metal.
Twice a year
Every six months, it's recommended to take your ring in for a professional cleaning and inspection. A professional will ensure that no stones have come loose and no prongs have been bent out of shape.
Toothpaste, baking soda, bleach, and other household cleaners are abrasive. While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler.
In a small shallow bowl, combine ½ cup white vinegar and 2 tablespoons of baking soda. Let your diamond ring soak in the solution for two to three hours. Rinse your ring under cold tap water and pat dry with a soft cloth.
Use Ammonia
Work is required to keep your diamond shining bright. Diamond jewellery can be cleaned by soaking it in a solution of one cup of warm water and one-fourth cup of ammonia for about 15 minutes.
It's a common myth that toothpaste can be used to clean jewelry. However, toothpaste can easily damage your diamond ring and gemstones. Diamond might be hard and strong, but this doesn't mean it has to be cleaned using toothpaste. The chemicals in the flavor used to make toothpaste are corrosive to metals.
Diamonds, for example, fair poorly when exposed to salt. These chemicals could potentially eat away at the fine polish that gives diamonds their beautiful shine and luster. Many precious metals, as well, don't react well to be exposed to salt.
Keep the diamond clean.
This is probably the most important (and affordable) tip. A diamond that's dirty will not sparkle. Diamonds have an affinity for grease, so it's important to clean them regularly.
The chemicals that you use while doing washing and cleaning work can also be harmful to your jewellery. The oils, lotions and soaps you use everyday can leave traces that accumulate over time and create a filmy layer over the stones, making them lose their sparkle.
A diamond that has not been cleaned for a while can look milky due to a buildup of film and dirt on its facets. Cloudy diamonds can also have diminished transparency from inclusions or other characteristics intrinsic to the crystal from which they are cut.
If you don't have a sonic cleaner, a quality jewelry cleaning solution or warm soapy water (using dishwashing soap) works extremely well and is safe. Soak for about 30 minutes or longer if your engagement ring is really dirty, then scrub with a super soft toothbrush to clean away debris.
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
Do: Dish Detergent and Warm Water. Although it may seem simple, the best homemade cleaner for diamond jewelry is a solution of dawn dish detergent and warm water. This solution is perfect for normal use which is expected for newer jewelry.