To reset your Canon Pixma after an ink refill, press and hold the Stop/Reset button (usually orange triangle or circular arrows) for about 5-10 seconds until the warning light disappears or printer starts working, which bypasses the ink level detection for that cartridge, letting you continue printing until quality drops, notes https://www.youtube.com/watch?v=N1AjUvmfM64, https://www.youtube.com/watch?v=YeSsOc86GOA, https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/PIXMA-MP240-how-to-reset-low-ink-warning-td-p/129956, https://www.stinkyinkshop.co.uk/articles/canon-ink-cartridges-reporting-empty-or-low-ink, https://www.youtube.com/watch?v=YeSsOc86GOA, https://www.youtube.com/watch?v=N1AjUvmfM64, https://www.stinkyinkshop.co.uk/articles/canon-ink-cartridges-reporting-empty-or-low-ink, https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/PIXMA-MP240-how-to-reset-low-ink-warning-td-p/129956. You might need to repeat this for the color cartridge, and this trick only disables the sensor, not the ink level count, so print carefully to avoid damage, say https://www.youtube.com/watch?v=N1AjUvmfM64, https://www.stinkyinkshop.co.uk/articles/canon-ink-cartridges-reporting-empty-or-low-ink, https://community.usa.canon.com/t5/Desktop-Inkjet-Printers/PIXMA-MP240-how-to-reset-low-ink-warning-td-p/129956.
It's a warning that your ink level is running low, that's all. The error can't be bypassed, since it's not really an error. It will continue to warn you until you run out of ink, or replace the cartridges. When one of the cartridges becomes empty, you will no longer be able to print. which seems obvious.
Here are a few suggestions:
Reset the Ink Cartridge
If your printer doesn't recognize the refilled cartridge, performing a cartridge reset often solves the problem. Some Canon models have a “Stop” or “Reset” button you can hold down to override the error message. For others, you may need to go through the settings on your printer or computer.
Refilled or remanufactured cartridges often use chips that don't always reset properly. If your printer thinks the cartridge is empty even though there's still ink, keep printing until you see faded pages—that's when you know it's time for a replacement.
Steps:
A Canon printer's lifespan generally ranges from 3-5 years for inkjet models and 5-7 years for laser models, but this varies greatly with usage, maintenance, and model quality, with some home units lasting longer with consistent care, and high-volume office machines exceeding 10 years. Key factors are regular use to prevent clogs, using genuine Canon supplies, and performing basic cleaning, with proper upkeep potentially doubling typical expectations.
Many users face issues like “I refilled my ink cartridge, but the printer still says it is empty.” This is because remanufactured or third-party cartridges often fail to sync with the printer's detection systems. Chips That Don't Reset: OEM cartridges include chips programmed to monitor ink usage.
After refilling ink tanks, close the bottle cap of the ink bottle securely. Discard empty ink bottles in compliance with local laws and regulations regarding disposal of consumables.
If your printer keeps showing "low ink" after replacing the cartridge, it's usually due to the printer's memory not resetting or the cartridge chip not syncing properly. Ensure the cartridge is installed correctly, then reset the printer's memory or disable the ink status monitor to fix the issue.
To fix the orange light on your Canon printer:
This because the amount shown is estimated based on how many pages you've printed since you last changed the cartridge. This error occurs due to the chip on your cartridge still reporting a low or empty ink level from its previous use.
Just above the circuit board on most printer cartridges, you'll find a small button. You've seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Ink cartridges that have been refilled can damage the integrity of the ink cartridge which can sometimes cause leaks in your printer. The manufacturers chip would also need to be reset as the printer may read the chip and think that it is empty.
Follow these steps:
Step 1: Turn the ink cartridge to where the microchip can be found. Step 2: Using the end of a paper clip, locate the reset button located just above the metal contacts in the center of the cartridge. Step 3: Gently press the reset button with the paper clip.