Yes, in Queensland, you must indicate left when exiting a roundabout if it's practical to do so, regardless of whether you're turning left, going straight, or turning right; you only signal on approach for right turns or U-turns, but always signal left as you leave. For straight-ahead, you signal left just before exiting; for right turns, signal right on approach and right through, then switch to left just before your exit.
You may enter a roundabout if there is a safe gap in the traffic flow, but should stay alert for fast-approaching traffic in the roundabout, which you should give way to. You should indicate left whenever you exit a roundabout.
Position your vehicle in either lane unless the arrows on the road or signs indicate otherwise. There is no need to use your indicator until you are ready to exit the roundabout. Give way to all vehicles already on the roundabout. Before exiting, use your left indicator and follow the exit lane marking.
How to signal when entering a roundabout and consequently, how to signal when exeting. The law states that you should signal right when entering if you are planing to take the first exit, and to signal left when planing to take the third exit. It also states that you should always signal right when exiting.
Use your turn signals when you change lanes or exit the roundabout. If you miss your exit, continue around until you return to your exit.
When taking the first exit (unless signs and markings indicate otherwise): Signal left and approach the exit in the left hand lane. Keep to the left on the roundabout and signal left to leave.
The golden rule
You approach the roundabout from the 6 o'clock position, entering the roundabout by turning left so that you go around in a clockwise direction, while at the same time, giving way to traffic coming from your right, who are already on the roundabout.
Going straight at roundabouts
If you want to continue straight at a roundabout: stay in the same lane when driving through the roundabout. do not indicate as you approach the roundabout, but if possible, signal left as you exit.
Failing to give way:
This is by far the most common mistake drivers make on roundabouts. Remember, drivers already in the roundabout have the right of way, so give way to them before entering.
Entering drivers must also signal their intention to turn left, right, or make a U-turn, and continue signaling while on the roundabout. When leaving, drivers should signal left if practical.
New Queensland driving laws focus on stricter mobile phone use for P-Platers, standardizing some rules nationally (like phone bans), increasing fines for offences (e.g., mobile phone use), potentially lowering speeds in pedestrian zones (30km/h trials), and new rules for personal mobility devices (PMDs), alongside ongoing stricter enforcement for distractions and fatigue. Key changes include P1/P2 drivers having zero phone tolerance (no hands-free/Bluetooth), mandatory high-vis/gloves for new motorcyclists, and potential drug testing for young drivers.
When you drive through a roundabout always use your indicators to let other road users know what you're going to do. At a roundabout you need to indicate: as you approach the roundabout (unless you've driving straight through) as you pass the last exit BEFORE the one you want to take.
“According to road rule 77, all vehicles in a built-up area, in the left lane or left line of traffic, or in a bicycle lane are required to give way to a bus entering traffic from the far left side of traffic that is displaying a 'Give Way to Buses' sign and their right indicator is displayed,” a spokesperson from the ...
The four essential rules for roundabouts are: Slow Down, Give Way to traffic already inside (including pedestrians/cyclists), Use the Correct Lane (left for left/straight, right for right/U-turn, following signs), and Signal your intention to exit by indicating left just before your exit, as noted by Transport Victoria, NSW Government, and RAC WA.
Going straight through a two-lane roundabout:
You don't need to signal when entering the intersection. Stay in this lane until you exit the roundabout. Signal right prior to your exit. Exit directly from the lane you are in.
Enter the roundabout » when there is a safe gap in traffic. Stay in your lane. » Use your right turn signal » to exit the roundabout. Yield to pedestrians in » the crosswalk at the exit.
Failure to Yield: Failure to yield is the most common cause of accidents in roundabouts. Drivers must yield to traffic that is already in the roundabout. Unfortunately, confusion or impatience often leads to errors.
To the guy driving this car, please slow down, get into the correct lane if you intend on turning right.... speeding, not giving way and cutting across in the middle of the roundabout so you can turn right was so dangerous to myself and the other road users around you.
As when you exit a road, you must signal left when leaving a roundabout, if it is practical to do so, and you should stop indicating as soon as you have exited the roundabout. However, when you are travelling straight ahead on a small single-lane roundabout, it may be impractical to indicate when exiting.
If you are going straight through (see the blue car), then drive in the lanes which are indicated by the road markings (there will be a straight arrow), and do not signal until you pass the exit before the one you want to take.
So, how many times can you drive around a roundabout in Australia before it's considered a crime? It turns out there's no road rule stipulating a limit on the number of times you can drive around a roundabout.
If you want to drive straight ahead on a roundabout: You can approach without signalling. But make sure you signal left as you exit if it's practical to do so. Turn your indicator off after you've exited.
Important points to remember during the 3 Point Turn
Make sure to do a kerbside stop prior to commencing the 3 Point Turn. Ensure you indicate your intent for at least 5 seconds before leaving the kerb.
Activate the left turn signal before entering. Circulate in the left lane, passing the first and second exits. Nearing the third exit (from your initial entry point), activate the right turn signal. Leave the roundabout on the third exit and deactivate the turn signal.
As you arrive at the roundabout, traffic coming from your right has right of way - you must stop until there is a break in traffic. Use your indicators for lane changes and where you are exiting. Signal your intent to other drivers when entering, going around and exiting the circle.