Yes, many traditional speed cameras flash twice in quick succession to capture two images for calculating speed using the distance between white lines on the road, but newer systems use single flashes, infrared, or no visible flash at all, capturing plates or using radar/lidar for speed verification, so the double flash is common but not universal, especially for modern tech.
Many traditional and slightly older speed camera systems flash twice in quick succession. The two flashes are used to take two images—one immediately after the other—for corroborating evidence. The key reason for this double image capture is to verify the movement of the vehicle and rule out errors.
Unless you have been stopped by the police, there is no way of knowing for sure if you have been caught speeding. You may notice a flash from a camera when you're speeding, but that doesn't necessarily mean you've been caught.
The best defense to a ticket for speeding is that you were driving the safest rate of speed based on the traffics around you, weather, road conditions, and your own experience along with your personal knowledge of the motor vehicle you were driving.
The "best" excuse for a speeding ticket appeal is usually a legally recognized defense, like a medical emergency, an unavoidable situation (e.g., vehicle breakdown), or proving the speed detection equipment was faulty, as these address the circumstances of the offense, not just an excuse. Common, though less reliable, excuses involve "I didn't see the sign" or "keeping up with traffic," but these often fail in court; being respectful and challenging the evidence (like radar calibration) offers a better chance.
Speed cameras trigger based on a set limit plus a tolerance, often around 10% + 2 mph (or ~3 km/h) over the posted limit, though this varies by region and camera type (fixed vs. average). While you can be caught at 1 mph over, authorities typically enforce at higher thresholds, like 4-10 mph over in a 30-40 mph zone, with some systems subtracting minor equipment error, effectively giving you a buffer.
In most cases, fixed speed cameras like the classic Gatso units will emit a bright double-flash as they capture your vehicle's registration plate. However, a flash is not a 100% guarantee of a ticket, and conversely, no flash doesn't mean you're in the clear: Flash but no ticket?
A speed camera has flashed me, when will I know if I am going to get a ticket? The police will send a notice to the address where the vehicle is registered to. The police must serve the notice to arrive within 14 days on the registered keeper of the vehicle.
Average speed cameras work by recording your speed at two different points. They don't capture your speed in a single flash.
Seriously though, the two flashes measure your distance travelled between the two flashes which is a set amount of time. They will have two pictures to look at and thus work out the distance you travelled by your position relating to the lines on the road, before and after.
Generally, modern speed cameras do not use a visible flash during the day. They may use a subtle infrared flash or a very low-powered white flash that is often hard to see in daylight. Modern digital speed cameras can capture a sharp, clear image using natural light during the day.
Syncing from Multiple Devices: If you use multiple devices, such as smartphones, tablets, and cameras, and you have them synced with your computer, duplicate photos may occur. When you synchronize your devices, it's possible that the same photos are copied to your computer multiple times, resulting in duplicates. 3.
They use radar technology to measure how fast a vehicle is travelling. If a vehicle is exceeding the speed limit for a given road, a camera and high powered flash take two photographs of the rear as it passes. The cameras only take rear facing photographs so the high powered flash doesn't blind drivers.
How Long Until the Fine? Speed and red-light camera penalties typically arrive within two weeks, although NSW can take up to 28 days. In Tasmania, fines may appear electronically in as little as four days.
They can also track two-way traffic, as opposed to older cameras which could only track vehicles in the left-hand lane. That means they can be used for speed enforcement and red light enforcement, making them notably versatile as far as councils and police forces are concerned.
You can't check if you've been caught speeding unless you've been stopped at the roadside by the police. Officers will usually tell you your speed versus the posted speed limit. If you're only slightly over they may let you off with a warning, but don't always expect this.
Yes, in many places like Australia, demerit points typically become inactive and stop counting towards a suspension after three years from the date of the offense, but they may stay on your driving record for longer (sometimes 4-11 years, depending on the region) and can still influence penalties for future offenses. The key is that the three-year mark is usually when they stop contributing to reaching your suspension limit, resetting your demerit count for suspension purposes.
The more points you have on your licence, the more expensive your insurance is likely to be. If you have three points on your licence for an offence like speeding or not complying with traffic lights, your car insurance could increase by 5%.
The newer ones flash once purely to photograph the number plate and don't need road markings. New modern ones use a combination of lidar, radar, etc they don't need to flash nor road markings. You can get caught speeding nowadays with no warning.
You might see a flash — but often you won't. The only certain sign is receiving a Notice of Intended Prosecution (NIP) in the post, usually within 14 days of the incident.
Speed camera tolerance refers to the margin of error or buffer added to a vehicle's detected speed before a fine is issued, typically around 10% plus a small fixed number (e.g., 2-3 mph/km/h) for guidance, though this varies by region and police force, with some locations having specific rules (like 2 km/h for fixed cameras in Victoria) or no official tolerance at all (like WA). This buffer accounts for speed camera inaccuracies and vehicle speedometer variations, but it's only guidance, and police can choose stricter enforcement.
Myth: You won't get caught speeding if you slow down just before the camera. Fact: Average speed cameras measure your speed over a distance, not just at a single point. They calculate your speed by measuring the time it takes to travel between two points using automatic number plate recognition.
Speed camera margins of error vary significantly by location and camera type, but generally involve a police-applied "buffer" (often 2-3 km/h or 3%) for calibration, meaning you might not get fined for going slightly over the limit; however, some authorities claim zero tolerance, while others don't publicize their buffer, so it's best to assume any infringement can result in a fine, with GPS apps often showing true speed better than your car's speedometer.
Some older designs like the Gatso and Peek camera systems still use a visible flash, but many newer camera models use infrared lights. These aren't usually visible to the naked eye. With these cameras, the Notice of Intended Prosecution (NIP) appearing in the post is the only tell-tale sign you were caught out.