Yes, you can restart Starlink through the app or by power cycling the hardware; rebooting fixes many issues by restarting the connection and is often the first troubleshooting step, with the app offering a dedicated "Reboot Starlink" option or you can unplug the router from power for a few seconds and plug it back in, allowing up to 15 minutes for a full boot.
The router will take a few minutes to reboot, and will interrupt your service until you set up again. Connect to 'STARLINK' from the list of available WiFi connections on your device. Once connected, you can setup your WiFi network name and password in your Starlink App settings.
You may resume service and change your plan at any time. If you restart your service before your next billing cycle, you'll be charged your usual monthly fee.
Power cycle your Starlink router
If you are unable to connect to your Starlink's Wi-Fi network, please power cycle the router: Disconnect both ends of the power cable. Remove power from the power supply. Leave everything disconnected for at least 10 seconds.
App Says Starlink is Offline - Searching
The Starlink "2-month rule" means that if you're using a Mobile Regional plan (or sometimes standard residential plans with portability) outside your registered service country for more than 60 consecutive days (about two months), you must update your service address to the new location or risk service suspension, as Starlink requires usage within authorized regions on their map, forcing you to change your account to avoid being cut off.
A simple Google search: There is no limit to how many times you can pause and unpause a Starlink Roam (formerly RV) subscription, according to Starlink. However, it's important to note that pausing and unpausing within the same billing cycle might result in extra charges, according to some user reports.
Only the Starlink Roam plans can be paused and unpaused. All other services (Residential, Priority) can be cancelled at the end of your current billing period.
Once your Starlink is powered on it may take up to 30 minutes to get online. If you connect to Starlink Wifi but still offline after 30 minutes then please reboot the equipment. Click on the status message on the Starlink App and follow the guidance.
Solid White: Good connection to internet. Blinking White: Connecting to the internet. If the router cannot get a connection to the internet in 20 minutes, the light will become red. Red: Not connected to the internet.
Step-by-Step Guide to Resetting Your Starlink Router
A reboot refreshes the system but preserves apps, files, and settings. Only a factory reset erases everything.
Power cycling your router really just means rebooting your router by disconnecting it from its power source, waiting 15 seconds, and then plugging it back in.
Definition: Your Starlink's software is out of date. Suggested Action: Your Starlink will download the latest software within the next 24 hours. If the download finishes before 3am, your Starlink will reboot automatically to apply this update. You can also update immediately from the app when the download completes.
Disadvantages of Starlink:
Leaving it on at all times will allow it to live longer. Not only that but cutting the power on these is somewhat sketchy especially at night since they tend to update randomly and without warning. You don't want to be unplugging it when that happens. Do NOT impulsively unplug Dishy if the service goes down.
The $200 Starlink deal typically refers to a temporary discount on the Starlink Mini Kit hardware, reducing its price from around $499 to $299 for portable, on-the-go internet, often part of seasonal promotions or to boost subscribers in less congested areas, with some areas also offering significant savings on the standard dish for fixed locations. These deals make Starlink more accessible, focusing on specific hardware (like the Mini) or regional availability where network capacity allows for more users, but availability and specific terms change frequently.
Examples that lead to intermittent connection:
Obstructions. Installation outside of service address. Improper Starlink installation and/or router placement. Hardware & cable damage.
Starlink briefly offered a $40/month "Residential 100Mbps" plan with unlimited data, capped at 100Mbps download speeds, ideal for smaller households, but it was quietly removed for US users by late 2025, though it remained available in some other regions like Australia and Canada. This budget plan was a limited-time, location-dependent offering, with standard US plans usually costing much more (around $120/month).
[July 24, 2025, 3:30 PM PDT]
ThousandEyes data indicates that Starlink began experiencing a widespread global outage around 19:15 UTC. Service began to recover at around 21:31 UTC, with most locations seeing recovery by about 21:40 UTC.
Starlink is designed to handle various weather conditions, so heavy rain will usually not affect your signal. However, during rare, severe storms with thick clouds and heavy rain, there could be some signal degradation due to the moisture in the atmosphere attenuating the radio signals.