But deep cleaning your refrigerator is extremely important to prevent your food from going bad and stop the germs from breeding. WD-40 helps you remove mold, rust, and rancid odors from your refrigerator.
Cleaning Inside of a Refrigerator
The best cleaner is a combination of abrasive salt and bubbly soda water. Create a homemade all-purpose cleaner by combining the following in a gallon of hot water: 1 cup clear ammonia, ½-cup vinegar and ¼-cup baking soda. Pour into a spray bottle, or use from a bowl with a sponge.
Over time the elements can leave your white chairs looking green with mildew and mould. A simple spray of WD-40 and a wipe down with a paper towel can remedy that.
Stop locks freezing with some WD-40
To begin, with tilt your padlock where you have clear view of the lock mechanism, comfortably grip your WD-40 Multi-Use Product and spray a small amount. This will coat the metal components to deter moisture from gathering or pooling. Allow a few seconds for the solution to set in.
But this multi-faceted product has limitations – it should never be used to lubricate locks! The main reason for this is that WD40 is not a true lubricant; it is a water and oil displacing solvent. This means that it can actually remove any lube already in the lock, leaving it dry and susceptible to sticking.
There are many different types of plastic, but there are two kinds that you should avoid using WD-40 on—polycarbonate and clear polystyrene plastic. Polycarbonate is a transparent plastic that is commonly used in greenhouses, and polystyrene is typically used for styrofoam and soft drink lids among other items.
The most common source of refrigerator mold is rotting food. Usually, you can (sadly) throw that food away and be fine, but mold spreads through the air and through surface contact. So spores form a moldy piece of cheese could spread through air circulation or onto the shelf it's sitting on.
If food is covered with mold, discard it.
What causes mould in fridges? The fungus that causes mould thrives in cold, dark and damp conditions. Coupled with bacteria, food debris and moisture, this makes the average household fridge a prime breeding ground for mould and mildew.
If you don't already have some at home, white vinegar can be inexpensively purchased at most grocery stores. Vinegar can be used to kill mold on both nonporous surfaces and porous surfaces. Compared to bleach, it can more easily penetrate porous materials like wood to kill mold growing underneath the surface.
Vinegar is a natural acid. It's non-toxic and harmless to the environment. It's also can kill up to 82% of mould species, including black mould, on porous and non-porous surfaces, such as glass, tiles and other smooth surfaces. You can use it safely on most surfaces pouring undiluted white vinegar into a spray bottle.
Disso (hospital grade) After cleaning with iDestroy mould remover and preventative treatment, when the surfaces are dry, an XO2 Disso antimicrobial treatment can be applied to surfaces and spaces via an electrostatic fogger.
Remove paper and clean with vinegar and water. Sprinkle fresh coffee grounds or baking soda loosely in a large, shallow container in the bottom of the refrigerator and freezer. Place a cotton swab soaked with vanilla inside the refrigerator and freezer. Close door for 24 hours.
Spray the inside of the fridge with a solution of vinegar and water, concentrating on soiled areas, and let it soak in. Wash the removed shelves and drawers with warm soapy water and set them aside to dry. Head back to the fridge and wipe everything down with a rag.
Mold generally looks slimy or fuzzy, tends to have a raised texture, and can come in a rainbow of colors, including deep green and black. Mildew is powdery, looks white or gray, always appears flat, and grows on surfaces.
Don't through it away! And save your containers! Put the container in the freezer until it is frozen solid. Then you can open it and pop the moldy whatever into the garbage with not a lot of fuss.
Mold will easily grow in an unplugged refrigerator. Mold grows easily in dark, damp areas. This means that an unplugged refrigerator can provide a suitable habitat for mold growth. Mold growth will give the interior of a refrigerator an offensive odor and may leave stains that require a lot of effort to remove.
While most molds prefer warmer temperatures, they can grow at refrigerator temperatures, too. Molds also tolerate salt and sugar better than most other food invaders. Therefore, molds can grow in refrigerated jams and jelly and on cured, salty meats — ham, bacon, salami, and bologna.
Putting a box of baking soda in your refrigerator gives those smelly particles something other than your leftovers to bond with. The unique characteristics of sodium bicarbonate make it very attractive to both acidic and base particles, and once these particles bond with the baking soda, the odor is neutralized.
Patients who suffer from arthritis are trying anything to relieve those stiff and aching joints. Some have even tried spraying sore joints with WD-40 as they would to fix a squeaky, door hinge. But this folk remedy is not proven to work and may even be harmful.
Some of the top uses for WD-40 around your home and garden include: Removes glue residue from old panelling. Helps lubricate gate valve on a house. Helps remove paint from tile flooring.