A brushed concrete finish gives you a rough texture on the surface of a concrete floor. You apply a brushed concrete finish when you want the floor to have slip resistance, such as on an outdoor walkway, and you do it by dragging a stiff-bristled broom or brush across a fresh concrete surface.
Firstly, Broom Finishing concrete creates a textured, slip-resistant surface. Secondly, it allows for a unique decorative element. By brushing the concrete in different directions, endless decorative patterns can be formed.
The most common ways of finishing concrete are by using a smooth and troweled surface, but this can be extremely slippery when wet. Therefore, broom finish concrete is the best way to go. This is where concrete has been poured and leveled using a stiff brush to give it a nice rough broom surface texture.
Because the rough texture of brushed concrete adds more traction, it's great for areas that are bound to get wet, such as a patio near a swimming pool. The extra traction can help prevent slips and falls.
Sealing a Broom Finish
A broom finish can stand up well to the elements, even without being sealed. However, if not maintained with sealer, over many years of rain exposure it will lose its broom finish and look more like exposed aggregate (due to the slightly acidic nature of rainfall).
Broomed/brushed concrete requires little maintenance and isn't slippery.
The most common reason people get a rough surface is due to laitance. This happens when the concrete is troweled too early with the steel trowel.
Painting Concrete with a Roller
Rollers are the easiest way to apply paint evenly to floors and walls. The best paint roller for concrete uses a 1/2- to 3/4-inch-thick nap. The nap is another name for the fabric paint roller cover and the thicker the nap, the more paint it holds to fill cracks and crevices.
Concrete that is not moist-cured at all dries too rapidly, and reaches less than half its potential design strength. It will also have a greater number of shrinkage cracks.
When you don't finish concrete floors, many things can occur such as wear and tear in high traffic areas, unwanted and unsightly cracks, higher associated costs, increased cleaning and maintenance, and water retention.
Concrete goes from a dull, rough surface to a shiny, smooth, polished surface through a series of grinding steps. This grinding is done with a series of diamond impregnated floor pads. These pads contain millions of microscopic diamonds that are used to grind the concrete and make it smoother.
The primary purpose for finishing concrete pavements is to remove any small surface imperfections and seal the surface of the slab.
Yes, you can pour fresh concrete over existing concrete. As long as your concrete is in mint condition, this task is doable. If you decide to pour a new mixture over an old slab, be sure it is at least 2 inches thick.
Marion Brush Manufacturing Co. Broom finishes, the most common surface textures for exterior flatwork, are created by pulling a broom over freshly placed concrete. Brooming creates a textured or slip-resistant surface with grooves typically installed crosswise (perpendicular) to the direction of travel.
Broom Finished and Brushed Concrete are one and the same. Broom/Brushed Concrete is concrete with a textured finish that is applied to freshly poured concrete with the use of a broom to create fine grooves on the surface of the concrete.
Broom Finish – The most popular finish for concrete driveways and walkways, this slightly rough finish is created by using brooms at exactly the right stage in the setting of the concrete to roughen the surface. Some patterning can be done during the process, as well.
Compared to brushed concrete, exposed aggregate is more slip-resistant. You have numerous options when it comes to colours and textures. Exposed aggregate does not require you to perform heavy maintenance tasks because it is durable.
Concrete should be sealed to protect from mold and mildew.
Because concrete is a porous material, it has a tendency to absorb moisture. When this moisture doesn't dry and the surface is left wet for an extended period of time, mildew begins to form and mold begins to grow.
Deters Color to Fade
Many people prefer using a driveway concrete sealer as it would enhance the color of stamped and exposed aggregate concrete, making it look vibrant and shiny. Also, sealing keeps the color from progressively fading.