When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
The solvents in WD-40 are great at breaking down the gunk and lime deposits that collect inside your toilet bowl. Just spray some into the bowl and give it a quick scrub with your toilet bowl brush.
You probably didn't know you could use WD-40 for bathroom cleaning, but because it's a lubricant that's not as harsh as most chemicals you use in the bathroom, it's great for getting rid of hard water stains and other stubborn stains without harming your surfaces.
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush. What's good for those caked-on pots and pans after cooking dinner is also good for removing a brown stain on the bottom of the toilet bowl.
These unsightly stains may be a result of high levels of manganese in your water. Manganese is a natural element that is commonly found in water, soil, and some foods and, at appropriate levels, plays a role in keeping us healthy.
Measure a quarter cup of baking soda, add roughly 50ml of warm water and proceed to mix until it is a paste. Then, with a wet towel, wipe the seat and apply the paste to the stained surfaces.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
Green or brown stains in the toilet usually indicate lime buildup. Lime scale forms as hard water evaporates and leaves a mineral buildup behind. As it dries, it picks up any dirt particles along with it, and slowly the stain builds, layer by layer, on the inside of the toilet bowl.
Combine 2 parts borax with 1 part lemon juice to form a paste. Smear the paste onto any remaining stains in the bowl, such as the ring formed around the waterline. Borax cleans while lemon juice whitens. Leave the paste to soak for two hours to lighten stains and whiten the bowl.
Removing oily stains, such as tar, shoe polish, bike grease, crayon and lipstick, from clothes can be a nightmare. Place the stained area on an old, clean towel or a wad of paper towels then spray with WD-40. Wait a few minutes then dab gently with a clean cloth or paper towels.
WD-40 Multi-Use-Product is a great alternative for cleaning glass surfaces and mirrors. It removes sticky residues and smears leaving you with clear glass. Always remove the product thoroughly with a dry cloth.
Destroy limescale stains for good. 1. Spray a generous coat of WD-40® Smart Straw®, all over the limescale areas such as the shower wall, faucet, glass, or kitchen sink.
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains! Phosphoric acid can even remove lime scale and another tough buildup that regular cleaners struggle with. This is an effective and refreshing home remedy if we ever saw one!
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
For a more heavy-duty approach, you can pour an entire bottle of white vinegar over and around the bowl, remembering to cover all of it. Then, leave the vinegar to work for a few hours or overnight. Use your toilet brush to scrub any leftover limescale deposits away the next day.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
Apply vinegar or lemon juice directly onto a cloth and scrub the limescale until it comes away. Alternatively, mix one part lemon juice or vinegar to four parts water. Put the solution in a spray bottle and spritz it onto tiles and plugholes. Leave this to soak for up to an hour for stubborn scale deposits.
The Surprising Reason Why Your Toilet Gets Dirty Fast
The high mineral content in hard water is usually to blame for those colored rings and tracks that form in your toilet bowl seemingly overnight, and make it appear dirty even if it was cleaned recently!
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.