Failure to Control Moisture (in the slab and air) Moisture in the slab, or moisture migrating through the slab (moisture vapor transmission) is the death of epoxy floors and must be dealt with or an adhesion failure is highly likely.
Clean up spilled gas immediately, because it will damage the surface of an epoxy floor if allowed to sit for too long. Paint, household cleaners and other abrasive liquids need to be cleaned up immediately.
The longevity of an epoxy floor system will vary based on thickness, use and maintenance. Typically, epoxy floors last between 10 and 20 years; much longer than a painted concrete floor, which will chip and wear quickly in high-traffic areas.
Moisture is one of the factors that cause epoxy flooring to peel. After washing your floor, allow it to dry. Let it sit for at least 24 hours before having a professional apply new resin after washing your concrete flooring.
Do not use Epoxies when temperatures of the air or the substrate will drop below 50 degrees F. Without first consulting with Epoxy.com Tech service for cold installation. Do not forget to allow extra time for epoxy to cure when working at lower temperatures.
In terms of daily maintenance, epoxy floors are pretty low-key. They don't need much, but a daily sweep and mop should be part of the cleaning routine. By removing the presence of any small particles, you'll keep the floor free of scratches and reduce wear and tear.
An easy fix is for experts to sand away a layer of the epoxy. By buffing the surface, professionals prepare the floor for a new coat of epoxy. With luck, the bubbles are only temporary. To avoid blisters, bubbles or holes in the first place, find an expert to apply your new resin floors.
A good epoxy patching kit can replace mortar to speed up this process. If the damage is far more extensive than a handful of minor cracks and chips, you may need to take more extreme measures to repair the flooring. You'll likely need to resurface the entire area before applying new epoxy.
Even though epoxy floors are extremely durable, they can get damaged by grease, oil or water. The damage won't happen immediately, but you should still clean the mess before you forget about it. If left for too long, even water can start to degrade your epoxy floor.
Can I put another coat of epoxy over cured epoxy? Yes. Since the epoxy has cured a chemical bond is not possible so what is called a mechanical bond is needed. This simply means that the cured epoxy has to be lightly sanded before the next coat is applied: the first coat should have a matt, almost white, surface.
Durable and long-lasting
Epoxy flooring is highly durable and will last for years to come. With other options, you'll find you must reapply the paint frequently to keep the floors looking great. With epoxy, you won't have to touch your floors again for years after the coating is applied.
When the benefits of a durable epoxy floor are compared to ceramic tile, more often than not, epoxy comes out on top. Durable, low-maintenance, safe, and aesthetically pleasing, epoxy floors sure live up to their name! Lasting for years on end, this cost-effective option will have you choosing epoxy over tile any day!
Hard to Repair
It's not possible to simply cover over a worn epoxy coat with a new one. Once that epoxy coating has begun to peel and flake, you must remove the old layer completely before reapplying a fresh coat. Otherwise, the epoxy won't adhere, and your problem will just grow worse.
Epoxy flooring looks glossy and shiny when new, but may fog over time. Clean the entire floor at least once a year to help maintain its shine. You can do this by hosing the whole floor with hot water and use a squeegee to dry. The idea is to remove any residues or cloudiness that can dull the floor surface.
Epoxy must be installed properly, or you won't be able to reap the benefits of its durability. An improperly installed epoxy floor can result in various issues. You might find mold and water seeping underneath your epoxy floor.
If you do encounter an uneven finish with your epoxy resin, how can go about fixing it? A good rule to follow is to mix a little bit more epoxy than you need, ensuring you cover your surface completely. So, if your epoxy has already cured properly, you will need to sand down the surface and apply a second coat.
One other undesirable type of discoloration is when an epoxy coating appears white or cloudy immediately after installation or curing. This is usually caused by the resin floor being exposed to water prior to it completly curing.
Epoxy is your answer. Not only can epoxy systems be very effective at repairing concrete cracks, but there are epoxy coatings available that also create a seamless, brand-new appearance to concrete surfaces as well!
The number one cause we see is that the resin and hardener were not mixed together at the proper ratio. Unlike polyester resins and vinylester resins, for instance, epoxy does not cure faster by adding more hardener to the mix. It simply will not cure.
When bubbles appear in a freshly applied epoxy coating, the most common culprit is something called “outgassing”. Outgassing is a site condition that allows air or gas from the concrete substrate to escape in excess and cause blisters, craters, bubbles, or pinholes.
Most common issue of epoxy not curing is by not using the correct mix ratio. Epoxy Resin is a two part system that requires the correct amount of Part A and Part B to be measured at the correct mix ratio whether it's 5:1, 3:1, 2:1 or 1:1. If measured and mixed correctly the epoxy will cure 100% of the time.
We have also found that Steam Mop's do an excellent job as well. 4. Keep in mind that epoxy floors are slippery when wet, so be careful while cleaning it and allow the floor to dry completely before pulling your cars back into the garage.
Yes, you can pressure wash epoxy since it is an effective way to remove hard-to-clean stains or build-up of mold. A surface cleaner is recommended for power washing, as it helps contain the mess and redirects water and soap back onto the floor, avoiding water and soap spraying elsewhere in the kitchen.