A room temperature of 18 – 22 ° C and a relative humidity of 40% – 60% is perceived by most people as pleasant and it is also ideal for the fabric of the building. Check the values in the living room and bedrooms regularly to reduce the risk of mould.
The World Health Organisation guidelines suggest 21 degrees in a living room and 18 degrees in the bedrooms, falling lower at night and when you are out. You don't need to keep your home at these temperatures all the time, but you should aim to bring it up to these temperatures at least some of the day.
Mold risk increases in cold apartment
This moisture, as well as moisture in the masonry, can promote mold growth. The mold problem is greater in the cold season than in spring or summer because cold air can physically absorb less moisture than warm air.
Mold grows best between 77° F and 86° F, especially if the air is humid. Water: Molds thrive in damp, humid, and wet conditions.
Mold growth can occur in cold rooms when ambient humidity is high, where there is poor ventilation, insulation failure, or when wood, cardboard, and other porous materials that can grow mold are stored in the room.
It is also very important that there is adequate ventilation in the room. Open a window or door so the mold spores can escape, instead of staying locked in your home.
Preventing mold through heating
It makes sense that people want to save on heating cost, but one of the best mold prevention techniques is keeping your heating on. If you seriously want to avoid mold in your home then avoid rooms cooling completely.
Mold grows faster in the summer months. However, winter doesn't always mean we are in the clear. Mold loves the dark spaces in our homes. Although it does not grow at temperatures below freezing, mold can survive in dormancy and await the coming spring.
a dehumidifier, which extracts moisture from the air, can be bought or hired. wipe down surfaces affected by condensation regularly to prevent mould growth. mould can be removed by washing the surface with a disinfectant or a fungicidal wash. This must be used in accordance with the manufacturers' instructions.
Mould will easily grow and spread if the right conditions are present. So, dehumidifiers don't kill mould, but they can help to prevent it from growing inside your home by reducing humidity. However, the best way to deal with it is to get rid of its source.
To Prevent Mold Growth in Your Home. Keep humidity levels in your home as low as you can—no higher than 50%–all day long. An air conditioner or dehumidifier will help you keep the level low. You can buy a meter to check your home's humidity at a home improvement store.
Many people think that mold issues disappear in the winter, but mold is actually a year-round problem. It flourishes in environments between 60 and 80 degrees and grows wherever moisture or humidity is present. It's a problem in the winter because it can grow in your walls and attic, places where it's hard to detect.
We have prepared a list of negative impacts for What Happens If You Keep Your Thermostat Too Cold: Mold Growth- The colder you keep your home, the colder the walls, ceiling, floors, windows and more will be. Water vapor that gets into these porous materials is the ideal place for mold to grow.
Ideally you should heat your home to a temperature of at least 18 °C. This is particularly important if you have reduced mobility, are 65 or over, or have a health condition, such as heart or lung disease. Having room temperatures slightly over 18 °C could be good for your health.
The recommended range is 50°F-60°F. The better the winterization in your home, the lower you can go, but 50°F is the lowest you should go. To be on the safe side, 55°F-60°F is wise.
Sometimes, humidity or dampness (water vapor) in the air can supply enough moisture for mold growth. Indoor relative humidity (RH) should be kept below 60 percent -- ideally between 30 percent and 50 percent, if possible. Low humidity may also discourage pests (such as cockroaches) and dust mites.
Some common examples of all natural mold inhibitor includes vinegar, raisin paste concentrate, starch, rosemary oil, whey, fermented flour, and other cultured products.
The key to mould prevention is keeping air moisture to a minimum. Dry any condensation that may be gathering on your walls, ceiling to windowsills. Dehumidifiers can also help to remove moisture from the air. Try to keep your bathroom and kitchen door shut tightly and ensure your windows are open whilst cooking.
So, if you are sleeping in a damp or mouldy room, you're spending about a third of your time inhaling dangerous mycotoxins spores. Frequently inhaling these spores leads to a plethora of health problems for both healthy and vulnerable people.
By opening the window we make the heating system work with maximum power. Although the radiator will become hot, the heated air will immediately escape through the window. It will therefore be a good practice to lower the pre-set temperature during ventilation.
Use waterproof paint
Waterproof paint can help prevent mould by creating a seal and stopping moisture from seeping in through the walls.
With that said, heat, humidity, and a damp, dark environment provide a perfect recipe for mold growth. It's important that in an enclosed space, such as a dark basement, that humidity levels are controlled to ensure that mold is unable to grow.
'Ventilation is key to preventing mould growth,' says Jordan Chance, product manager at PlumbNation. 'Make sure to leave bathroom windows open for at least 10 minutes after showering and bathing in order to clear excess moisture from the atmosphere. ' It also helps to turn on your bathroom extractor fan.
Ventilate your kitchen and bathroom for about 20 minutes after use by opening a small top window. Use an extraction fan. Keep kitchen and bathroom doors closed when in use to prevent moisture escaping into the rest of the house.
Prevailing wisdom is that at least 5 minutes—and ideally 15 to 20 minutes—a day of ventilation significantly improves indoor air quality. For a strong ventilation, open the front and back door, along with windows on the path in between, to get the baddies out.