For most purposes, Harris recommends combining one part baking soda with two parts white vinegar. That combo can cut through grease and lift stains, sometimes better than store-bought cleaners, she says. Important: Never combine vinegar with bleach.
Mix 1 2/3 cups baking soda and 1/2 cup liquid soap in a bowl. Dilute with1/2 cup water and add 2 tablespoons of white vinegar. Stir the mixture with a fork until any lumps dissolve. Pour the liquid into a spray bottle.
Adding vinegar to baking soda gives you an immediate reaction. Adding baking soda to vinegar, the reaction is delayed, but then fizzes the same amount. More vinegar is better. A 12 to 1 ratio of vinegar to baking soda caused a fizzing explosion!
Although mixing vinegar and baking soda is not considered dangerous, you should still avoid mixing these in a container. Vinegar is acidic and basic soda is basic, so the by-products are sodium acetate, carbon dioxide, and water that are not toxic.
When baking soda is mixed with vinegar, something new is formed. The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution.
To make a spray that will clean just about anything—countertops, the sink, light fixtures, and more—mix 13 ounces of hot water, ½ cup of white vinegar, 15 drops of grapefruit essential oil, 10 drops of lavender essential oil, and seven drops of lemon essential oil in a spray bottle, says Kimberly Button, a certified ...
All-purpose cleaner: Mix one cup vinegar, two teaspoons of borax, four cups hot water, five drops liquid dish soap, 10 drops tea tree oil, and 10 drops your favorite essential oil (optional).
As a general rule, most natural cleaning experts suggest mixing one part vinegar to one part water. These recommendations typically rely on distilled white vinegar as the cleaning element. If homeowners are using cleaning vinegar, they may want to add a little more water to achieve a similar amount of acetic acid.
Use a 1:1 ratio of diluted vinegar and water and store it in a spray bottle. Then you can spritz and disinfect your kitchen sink, counters, or any other spots that you'd normally use bleach but want to be food-safe. To counteract the vinegar smell, you can use soapy water to rinse the sink afterward.
Most of the time, a mixture of vinegar and water in a 50/50 solution will suffice, but not always. Shower heads only require white vinegar, add sprinkles of baking soda when cleaning a toilet or a bath, water it down to clean tiles.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own.
Do You Have to Rinse after Cleaning with Vinegar? Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Just mix a half-cup of baking soda with a few tablespoons of water, adjusting the ratio of both until you have a spreadable paste. For some cleaning jobs, you can mix baking soda with other household ingredients like dish soap or hydrogen peroxide (more on that later).
Detergents are the most common type of cleaning agent and are used in home and commercial kitchens.
PureWow recommends combining 1/3 cup of baking soda with 1 cup of white vinegar in a gallon-sized Ziploc-style plastic bag (You'll probably want to do this in the bathroom). The mixture will start bubbling, and then you can place your showerhead in the bag, completely submerging the head.