Pinpoint inclusions As the name implies, these inclusions are minute crystals usually white in color present inside the diamond. These resemble a small point of light and are, by far, the most common of all flaws found in diamonds.
Inclusion #1: Bruises
These are small concussions that mark the surface of the diamond and may show very small root-like lines inside the gem. They create feather-like inclusions into the stone. This type of inclusion usually occurs when a diamond cutter doesn't cut the stone carefully.
Almost every diamond has imperfections, but the clarity grading of a stone will reflect how visible these imperfections are. For example, VVS1-VVS2 diamonds (very, very slightly included)contain inclusions that are hard to see with a jeweler's loupe.
There are two types of imperfections: inclusions and blemishes. Inclusions are internal imperfections, while blemishes are located on the surface of the stone. Inclusions occur at the time of a diamond's geological formation.
A carbon flaw is a blemish present within a diamond crystalline form of carbon, usually seen as a black spot. The blemish may be microscopic or visible to the naked eye. The spots are undesirable imperfections since they can be seen more easily than other flaws.
Repolishing and Minor Recutting
In order for a diamond to be successfully repaired, it must have enough initial carat weight that it can afford to lose some during the reparative process. Depending on the positioning of the damage, the carat weight loss is fairly low (usually somewhere between 0.02ct and 0.10ct).
A diamond with a flaw is better than a common stone that is perfect. A rare, precious opportunity that comes with some problems is better than a regular opportunity that seems to be perfect.
Inclusions like pinpoints, needle, and feathers can be considered negligible inclusions or the best inclusions to have in a diamond. The only factor that must be complied with these inclusions is that they should only appear at 10x magnification and not above the same.
A lot of diamond mining is unregulated and therefore there is no control over its impact on the environment. Mining is not sustainable and is creating extreme amounts of waste for a small amount of stones on top of destroying biodiversity in the areas that are mined.
Diamond Clarity Gets Worse Over Time
The only way diamond clarity can decrease over time is if the diamond is subjected to chipping or breaking. Inclusions inside the diamond are internal flaws, and do not change over time. The inclusions remain as they are, or they can be improved through diamond treatments.
Diamonds which, without a loupe or a microscope, have undetectable imperfections are referred to by gemologists as eye-clean. These diamonds are more expensive because their flaws haven't altered the stone's natural beauty. Diamonds with large imperfections that are easily visible to the naked eye are less desirable.
1. Asprey Cut. At first glance, the rare diamond cut “Aspret Cut” might seem similar to the square shaped “Cushion Cut”, however – its cutting characteristics are special and are like no other. The Asprey Cut was designed by one of the world's most renowned diamond cutter, Gabi Tolkowsky.
Arguably, fancy blue diamonds are the second rarest diamonds on the market. Comprising only 1% of all the mined colored diamonds in the world, blue diamonds are often associated with royalty. The color grading ranges from a very faint blue to a fancy vivid blue.
A round brilliant cut diamond is so 'brilliant' because it has the highest number of facets. A total of 58, to be exact, which means that when the light enters such a diamond, it's reflected through 58 facets before leaving the diamond.
Since a round diamond is thought to hold the most value when compared to the other shapes, it will almost always be given a higher price than any other shape with similar clarity, color, and carat weight.
Fair/Poor Grade Diamond Examples
Fair and Poor cut diamonds usually have steep crowns and steep pavilion angles which gives them a really dark looking appearance. This makes them look extremely small for their carat weight. Because of their abysmal proportions, their brilliance and sparkle are horribly affected.
Diamond clarity is the assessment of small imperfections on the surface and within the stone. Surface flaws are called blemishes, while internal defects are known as inclusions.
Keep the diamond clean.
This is probably the most important (and affordable) tip. A diamond that's dirty will not sparkle. Diamonds have an affinity for grease, so it's important to clean them regularly. Find out how to keep your diamond clean.
The oils, lotions and soaps you use everyday can leave traces that accumulate over time and create a filmy layer over the stones, making them lose their sparkle.
A dirty stone doesn't sparkle because light simply can't enter the diamond and causes it to appear dull. So, if you notice your diamond jewelry getting cloudier overtime, it's likely due to a dirty surface and there's an easy fix to restore their luster.
Visit A Trusted Jeweler
Many jewelers will appraise your stone free of charge and experts will often be able to tell immediately if your diamond is authentic or not. If your stone came with a certificate, your jeweler should be happy to take a look at it and tell you whether it is from a trustworthy source.
What is the best diamond clarity? The best diamond clarity rating is Flawless (FL). These are the rarest diamonds in the world; less than 0.05% of all diamonds are Flawless or Internally Flawless.
However, the diamond is less likely to shine if it doesn't have a good cut. As a result of a poor cut, the diamond will have much more of a dull appearance that can make it appear hazy, taking away from that shine that people often want when investing in diamond jewelry.