Make a cleaning solution Make a mixture of baking soda and liquid soap using two parts baking soda with one part soap, with a bit of water. Vinegar is a non-toxic cleaner that kills mould and cleans bathroom tiles. Simply mix an equal amount of vinegar with water, and you have a non-toxic, effective cleaning solution.
First, wash your tiles and grout with sugar soap using a toothbrush and scrubbing brush. We used Selley's Sugar Soap concentrate for this, mixed with warm water in a bucket – it works a treat. Use your toothbrush, scrubbing brush and some elbow grease to scrub the grout and give it a good going-over.
Clean ceramic tile floors with warm water or a mixture of warm water and a few drops of mild dish soap. Add fresh water frequently to avoid cleaning with dirty water. Wash and dry one section of the floor at a time.
Simply mix a small amount of baking soda with water and apply it over your tiles using a damp mop or sponge. Let the mixture sit for several minutes before wiping clean, then watch as your tiles start to shine again! With this simple trick in your arsenal, you can say goodbye to dull-looking tiles once and for all.
Vinegar is perfect for cleaning shower tile and grout! It can dissolve soap scum and hard water stains and work as a mild mold remover and disinfectant!
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Clean the Tiles and Grout
Professionals apply a combination of warm water and liquid dish soap on the tiles and scrub with a brush. Then wash the spot thoroughly to make it look sparkling clean.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed. For other types, however, like terracotta, marble or grante, we recommend you look for ph neutral cleaner that will not harm the material.
Tile cleaner
If you'd like one product that cleans everything in your bathroom, the famous blue bottle of window cleaner might just be it. Windex can also be used to clean tiles and grout, without causing any damage.
Combine about a cup of white vinegar with a gallon of water, and get to work. You can either mop or clean by hand. When scrubbing, get rid of hard-to-remove grime with a baking soda paste. Baking soda acts as a scouring solution and can get under deeply set dirt buildups.
Our top pick for the best overall shower cleaner is the Clorox Plus Tilex Daily Shower Cleaner for its protective, bleach-free cleaning power and consistent results. For those who want an eco-friendly alternative with the same effective cleaning power, we recommend Lemi Shine Shower + Tile Cleaner.
Combine equal parts white vinegar, rubbing alcohol and water, and then add ½ tsp. of liquid dish soap and a few drops of peppermint essential oils. This works well whether you use a bucket or spray bottle to dispense onto your floor as you mop. As an added bonus, peppermint oil deters ants and mice!
What's the best homemade grout and tile cleaner? Mix together 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 tsp dish soap. Apply cleaning mixture onto the grout, wait 5-10 minutes, scrub, sweep up the excess baking soda, and rinse.
High-traffic areas, like kitchens, bathrooms, hallways, and entryways, require weekly mopping. Infrequently used rooms, such as formal living areas or guest rooms, can be mopped every other week, or even once a month, so long as they're vacuumed once every seven days to remove dust and grit.
Vinyl or Linoleum Bathroom Flooring
One of the most budget-friendly bathroom flooring ideas, vinyl is easy to clean, waterproof, and stainproof. Choosing a top-quality sheet vinyl or linoleum (rather than peel-and-stick tiles) will reduce seams where water can seep through.
The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away. If, however, you have sealed your grout on a regular basis, the vinegar won't be an issue.
Simply pour vinegar from the bottle into the cap and pour it over the dirty grout lines. Allow the lemon juice or vinegar to sit for 10 to 15 minutes. Then, scrub with a small brush or old toothbrush. Rinse the treated area and wipe dry with a towel or rag.
All you need for this method is a tablespoon of baking soda, liquid dish soap, white vinegar, a damp sponge, and some hot water. You need to gently dip the sponge in the mixture and squeeze the residual out of it before you start scrubbing the scum off your tiles.
You can find different porcelain tiles, but the easiest to clean tile is the polished or glazed porcelain tile. You can clean these tiles by sweeping off any extra dust, mopping them with a cleaning solution, rinse with water, and wiping them dry, which will give you the best results.