Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes.
White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Iron Bacteria
Iron or manganese bacteria form sludge-like deposits that are orange or dark brown in water. Your water might also smell unpleasant and have floating particles of orange or brown. If allowed to accumulate, iron and manganese bacteria may lead to a clogged toilet.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Grab some gloves and use a Magic Eraser to go to town on toilet bowl stains. Some users even recommend cutting a piece off and letting it dissolve the bowl to remove that unsightly ring all on its own.
To remove tough stains, add the baking soda and vinegar mix to your toilet and then allow the solution to sit in the bowl for up to 30 minutes. During that time, the chemical reaction between the sodium bicarbonate and vinegar will work to eat away at those stubborn hard water stains.
Hydrogen oxide (separately, a great cleaning agent and antiseptic), if mixed with vinegar, creates peracetic acid, as vinegar contains acetic acid. This combination of vinegar and hydrogen peroxide is potentially toxic and corrosive, which can break down or damage the surface it is applied to.
Don't mix hydrogen peroxide and vinegar together in the same mixture. This can create peracetic acid, which may be toxic and can irritate your throat and lungs, eyes and skin. You can, however, alternate spraying hydrogen peroxide and vinegar on a surface.
Water entering through the rim of the bowl can also be slowed by mineral deposits in the small holes under the rim. The best toilet bowl cleaner I've come across in these situations is muriatic acid. This is a very powerful chemical that should be used with great care and respect.
To get rid of dirt and grime, toilet bowl cleaners use hydrochloric acid. Hydrochloric acid is referred to as muriatic acid in ordinary cleaning products, the primary purpose of it is to clean concrete by peeling away the outermost layer. Why is it harmful? The standard toilet cleaner contains approximately 10.5% HCl.
Flushing Out Germs and Harmful Bacteria
All of these products contain active ingredients like antimicrobials to kill germs and odors, surfactants to make soil removal easier, acids to remove hardwater stains and deposits, and fragrances that leave your bathroom smelling fresh.
Simply sprinkle baking soda on the stains and scrub with a brush. Use bleach: Bleach is a powerful cleaning agent that can quickly remove stains. However, it should be used sparingly as it can damage the porcelain on toilet bowls. Apply bleach to the stains and let it sit for several minutes before rinsing away.
The Negative Effects of Using Hydrogen Peroxide as a Rinse
Rinsing with undiluted hydrogen peroxide can burn your organs and cause internal bleeding.
Hydrogen peroxide actually irritates the skin and inhibits wound healing. The advice about using it has changed because new research shows that the irritation it causes is not worth the antiseptic effect.”
Hydrogen peroxide unfortunately does not discriminate between bacteria cells and our own cells. While you may think you are thoroughly cleaning your wound, you are causing corrosive tissue damage, significantly impairing the healing process, and irreversibly worsen the scarring process.
This match made in heaven has been a household staple for a long time and I make sure to keep it handy. To make the solution is simple and easy on the wallet! Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned.
Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
The process doesn't require fancy chemical solutions- distilled white vinegar will do the trick. Remove the tank cover and pour in white vinegar until it is one inch below the top rim. Let the vinegar sit for twelve hours, giving it time to dissolve any lingering mineral deposits. Flush three to five times.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.