On a tape measure, .375 (or 0.375) is the decimal equivalent of the fraction 3/8 (three-eighths) of an inch, representing a common mark found between 1/4 inch and 1/2 inch on most standard measuring tapes, often the fourth small mark after the 1/4 inch line on a tape marked in 1/16ths.
If you are dealing in inches, . 375 inches is 3/8 inch.
On a standard ruler, which typically marks inches into fractions, 0.3 of an inch is slightly less than 5/16 of an inch. Since 0.3 is equivalent to 3/10, and most rulers mark inches in 1/8 or 1/16 increments, you would estimate it just under halfway between the 1/4 (4/16) and 5/16 inch marks.
Answer: 0.3 as a fraction can be written as 3/10
Firstly, we write the given number in its simplest fraction form p/q, where p and q are positive integers. For that, write the given number as 0.3/1, then multiply and divide by 10. Because there is one digit after the decimal, hence we multiply and divide by 10.
Answer: 0.375 can be written as 3/8 in fraction.
0.3 does not equal (1/3), 0.333333 repeating = 1/3.
On a standard tape measure, the biggest marking is the inch mark (which generally has the biggest number, if it has them). As the increments decrease, so does the length of the mark. For example, ½" has a bigger mark than ¼" which has a bigger mark than ⅛", and so on. Read 1 inch.
Final Answer: 0.3 millimeter is approximately 0.012 inch.
375 as a fraction equals 3/8.