Conclusion. Generally, a flashing blue light means your Ring Doorbell is connecting to a network during setup, has been successfully set up, or is currently charging. However, a flashing blue light can also indicate the device is booting up, the doorbell has been reset, or the front button has been pressed.
If you've just installed your Ring Video Doorbell Pro and now there's white circle blinking on the front of the device, it is not yet fully charged. Once the internal power cell is fully charged, the white circle will stop blinking and the device will move into setup mode.
White light flashing left - failed setup for a reason other than incorrect password or Ring network access point. doorbell is updating internally. Solid white light - doorbell is idle. Note: This mode only applies when your doorbell is wired to your home electricity.
Your Ring Video Doorbell Pro or Ring Video Doorbell Pro 2 has an LED light located on the front to show you the status of your unit. If your Ring Video Doorbell shows a solid white light it's either in idle mode or recording. Additional descriptions of light patterns are shown below: Activity. Flashing Light Pattern.
A flashing white LED on the front of the Pro, after attempting the Wifi connection step, is either an update being performed or setup failure. Once you connect successfully to your home Wifi, the Video Doorbell Pro will automatically update if necessary.
If your Ring camera is flashing blue rapidly, it means that it is going through a factory reset. This can happen if you are setting up the camera for the first time or if you are trying to reset it to its default settings.
Can you tell if someone is watching you on Ring? If you see the infrared light turn on at night while the security camera is in Disarm Mode, someone else may be viewing your live feed. Change your router's password and ensure that video encryption is enabled on your Ring Camera.
The normally white LED ring around the button turns blue indicating that the camera is active AND someone is watching it.
The blue light is moving upwards – This kind of light indicates the doorbell is connecting to a network. The blue light is flashing on and off for a second – If you see this pattern, it means that the camera on the Ring doorbell is beginning to operate. If it persists, you're dealing with a boot loop.
Ring's cameras and doorbells show a light on the front when they record or if someone's watching a live view—they also send motion alerts to your phone. You need to pay for a Ring camera storage plan to record video.
Straight Answer: No, there is no way to tell if someone is watching you through the Ring camera, at least physically. Jamie Siminoff invented the Ring doorbells and security cameras.
Camera Access with Ring Alarm
If Ring cameras, doorbells, and Ring Alarm are present at a Location, all Shared Users can access all the cameras and doorbells there by default. This is, however, at the Owner's discretion. An Owner can limit any Shared or Guest User's access to cameras and doorbells at their Location.
The blue light on your Video Doorbell should only show when answering an event, or engaging in a live event, in the Ring app. Another reason a blue light might be noticed is when you are reconnecting to the network, or during connection step when setting up your Doorbell.
The green, amber, and red colors are indicators of your device connection. Green is good, red is poor. Learn more about fixing connection issues. Reboot your Ring Doorbell or Camera in the Ring app. In order to reboot your Ring device, it must be connected to wifi.
A: If hardwired (properly), it should and will illuminate. If on battery - it should not. If you are seeing the light come on only some of the time - you have a poor connection to wall or low power from wires.
Ring doorbells use a blue light to indicate that they are connected to your home Wi-Fi. If you're seeing a blue light, it means the device is not spinning. Reference: ring doorbell flashing not spinning.
Blue or white flashing from the setup light can be an indicator of a device action such as setup mode or an update. The best step is to check your Ring app to see if you have a good RSSI, or signal strength, in the Device Health section for your camera.
The spinning circle means that there's an issue in the data transfer between your Ring devices and the Ring App.
Top reasons your Video Doorbell Pro may be offline
Your device may not be receiving power or be unplugged. Your location's internet may not be working, or your internet service provider is experiencing high traffic. You recently changed to your wifi network, wifi password or internet service provider (ISP)
To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting. It may take a minute to fully complete this process.
Researchers at Dojo, an Internet of Things security company, have found that bad actors can intercept your Ring doorbell by accessing the network it uses. This is possible because the data traveling between the Ring device and its application is not encrypted.