How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
If you get brown stains in your toilet bowl, the good news is that it's not caused by anything that you, ahem, do in the bathroom. It's actually due to high concentrations of minerals in hard water, like calcium, iron, and manganese, that build up inside the toilet bowl over time, according to Hunker.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Pour a half-cup of hydrogen peroxide into the toilet and let it sit for 30 minutes. Use your toilet brush to scrub the stains. Add a sprinkle of baking soda and scrub again if the stains persist. Turn on the water and flush away stains and germs.
To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Don't leave CLR for longer than two minutes.
The combination sounds like it'd be a powerful disinfectant, but the two should never be mixed. "Together, they produce chlorine gas, which even at low levels, can cause coughing, breathing problems, and burning, watery eyes," says Forte.
Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
Pour about 1 litre of undiluted white vinegar into (pouring around) the toilet bowl. Leave it to work its magic for 3-4 hours (so make sure you've had a wee before you start cleaning the loo!) Use more white vinegar to scrub the sides of the bowl, under the rim and down into the water.
Domestos Zero Limescale Lime Toilet Cleaner eliminates 99.9% of germs*. Our toilet cleaner removes toilet bowl stains and 100% of limescale.
Soak a rag or a cloth in vinegar or lemon juice and wrap it around your tap, ensuring all areas are covered. Secure the cloth with an elastic band and leave for an hour. Occasionally squeeze the cloth to release more of the acid onto the tap. Remove the cloth and wipe away the limescale.
Place the shower head in the container and leave it to soak for 20-30 minutes. Lemon will be stronger and require less time than vinegar. Vinegar may need multiple 30-minute stints of soaking. Remove the shower head and rinse it in water, brushing off any leftover limescale.
DO not use CLR on natural stone or marble, terrazzo, colored grout, painted or metallic glazed surfaces, plastic laminates, Formica, aluminum, steam irons, leaded crystal, refinished tubs or any damaged or cracked surface. CLR may etch older sinks, tubs and tiles. CLR is corrosive.
Never leave CLR Calcium, Lime and Rust Remover on an area for longer than two minutes.