The best way to clean your diamond jewelry and restore its sparkle is to: Spray a soft-bristled toothbrush with Windex and gently brush diamond jewelry thoroughly, removing any dirt on the surface of the diamond or dirt that has settled in and around the metal.
Toothpaste, baking soda, bleach, and other household cleaners are abrasive. While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler.
Windex and Hydrogen Peroxide Solution.
Soak your diamond ring for about 10–15 minutes. The Windex will remove the day-to-day dirt build up and the hydrogen peroxide will kill any bacteria on the ring. After soaking your engagement ring in the solution, gently scrub your ring with a soft toothbrush to remove residue.
The best mixture of cleaning solution for diamonds is ammonia or mild dish detergent with water. The ratio of this solution should be a quarter cup of ammonia to one cup of lukewarm water. After mixing the solution, simply let the piece of diamond jewelry soak in the solution for 20-30 minutes.
Chlorine bleach or abrasives (such as household cleansers or toothpaste) should never be used when cleaning diamond jewelry. Chemicals like chlorine can damage some of the metals used to alloy gold for diamond settings and abrasives can scratch gold and other metals.
To clean diamonds, professional jewellers will use a specialised device referred to as an Ultrasonic Jewellery Cleansing Bath to get your piece sparkling once again. This device uses vibration and ultrasonic sound waves to lift the dirt and other pollutants off your diamond.
While vinegar is slightly acidic and needs to be used with caution on more porous stones, it will do a fabulous job on your diamond ring. Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours.
Keep the diamond clean.
This is probably the most important (and affordable) tip. A diamond that's dirty will not sparkle. Diamonds have an affinity for grease, so it's important to clean them regularly. Find out how to keep your diamond clean.
3) Windex and Hydrogen Peroxide
These two partners in crime can easily help you clean your gold or silver diamond ring. In a small bowl combine equal quantities of Windex and hydrogen peroxide and place your ring inside for 15 to 20 minutes.
Remember that the solutions we offered for solid gold and silver jewelry do not transfer to diamonds. Baking soda and vinegar can seriously damage your gemstones and should never be used with these pieces.
It's a common myth that toothpaste can be used to clean jewelry. However, toothpaste can easily damage your diamond ring and gemstones. Diamond might be hard and strong, but this doesn't mean it has to be cleaned using toothpaste. The chemicals in the flavor used to make toothpaste are corrosive to metals.
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
A: Most Windex® Glass and Multi-Surface Cleaners are formulated with detergents, solvents, fragrance and in some cases ammonia (see below for ammonia-free products).
The way each of a diamond's tiny facets are cut and polished determines how much sparkle the diamond will have, which means the style and quality of cutting and polishing are equally important. More facets create more sparkle, and to achieve maximum sparkle, each facet must be cut and polished properly.
Because diamonds reflect white light, colorless diamonds produce the best sparkle and fire. In fact, the more color a diamond has, the less likely it is to reflect white light. And as a result, will produce less sparkle. A D-color diamond is the highest quality, and will offer the greatest sparkle.
The chemicals that you use while doing washing and cleaning work can also be harmful to your jewellery. The oils, lotions and soaps you use everyday can leave traces that accumulate over time and create a filmy layer over the stones, making them lose their sparkle.
There are many common cleaning products that people may think are good to clean diamond rings with, but they can actually be quite damaging. Chlorine bleach, abrasives (like toothpaste or baking soda), or acetone should never be used on any jewellery.
It is a common myth that toothpaste is a good way to clean your jewellery. This is actually false. Toothpaste can damage your diamonds, gemstones, gold and silver. Toothpaste is abrasive and has a hardness of around 3/4 on the Mohs Scale of Hardness.
Refraction and dispersion are the reasons why the light ray travels through the diamond. Diamond acts like a tiny complicated prism through which the light ray travels at different angles and gives a shiny appearance.
Clarity issues are the main reasons why a diamond can look cloudy. This is fundamentally due to the nature/severity of the inclusions and things tend to get worse as you go lower in clarity grades (e.g. SI1 and below).
The short answer is no. Toothpaste is not a good option for cleaning your ring. Toothpaste contains scrubbing particles to polish your teeth, but these particles are often harder than the metals in your ring, especially gold or white gold.