You can recover significant amounts of gold from electronics, with older computers containing much more (around 1-5 grams per board) than modern smartphones (about 0.034 grams), and e-waste as a whole holding up to 800 times more gold than mined ore, though professional recovery requires large volumes (hundreds of grams) and specialized processes, with newer methods extracting nearly 100% from circuit boards.
Gold has maintained a high financial value, reaching over $2,000 an ounce. At these prices, a skilled recycler extracting gold from electronics can expect to receive over $10,000 worth of gold from just one ton of computer circuit boards.
Roughly 300 grams of gold can be recovered from every one ton of circuit boards, depending on device types. Q2: Is e-waste recycling profitable? Yes. Precious metals like gold and copper make e-waste one of the most valuable waste streams on Earth.
Devices with More Gold than Smartphones
For example, high-end desktop computers and server-grade motherboards may contain up to 1 gram of gold, compared to the 0.034 grams in a smartphone. This is because these larger devices require more powerful and reliable components.
The grade of electronic waste is generally between 800 and 1500 g/t, and 0.8-1.5 g of gold can be extracted per kg of waste.
If you invested $1,000 in gold 10 years ago (around late 2015/early 2016), your investment would likely be worth significantly more today (late 2025), potentially in the range of $2,000 to over $3,000, reflecting substantial price appreciation, though less than the S&P 500 but outperforming during certain periods of market stress, acting as a hedge against uncertainty, with returns varying based on exact entry/exit points and premiums/spreads.
Among consumer electronics, computer components are the richest in gold. Circuit boards, especially motherboards, feature gold in their connectors and pins. CPUs are particularly valuable, with older processors containing 0.2 to 0.5 grams of gold each.
It depends on the processor, if they have small pins or not. P2 processors were designed more like a PCI card. Other processors have no pins, but small gold contacts (like the p4). And even if they are golden they are not completely out of gold, but they only contain a layer of gold which is a few atoms thin.
Remotes contain only a few cents' worth of gold that can be found on the edges of the printed circuit boards they contain. But if you do the math, you'll see that a few hundred remotes can be worth more money than you suspect.
This is because the gold content in rams is about 0.155%, which means that there is 15.5 milligrams of gold in every gram of rams. So, if you have 1 kilogram of rams, which is equal to 1000 grams, you will have 15.5 grams of gold. About 1 to three grams depending on the type and era of the computer pins.
Some other sources estimate that your average computer contains about 1/5th of a gram, or about $12 worth, of gold in them. On the other hand, laptops typically contain about 1/10th of a gram of gold, or around $6 worth. However, the actual value will depend entirely on the type of e-waste you are looking at.
Cable manufacturers do not generally advertise how pure the gold used in their connectors are, but there's a good chance they are using gold that's at least 99% pure if they are advertising that their Ethernet cables have 50 micro-inches of gold plating.
What circuit board has the highest gold content. The gold content in circuit boards varies due to multiple factors, but generally, gold-plated circuit boards and mobile phone circuit boards tend to have higher gold content.
Scrap gold prices per gram vary significantly by purity (karat) and current market rates, but generally range from around $50-$80 USD for 10K/12K, $80-$110 USD for 14K, to $100-$130+ USD for 18K, with 22K and 24K being higher; you must check current spot prices and specific buyer rates for your karat to get an exact value, as these are just examples based on recent data.
Cutting the SIM cards into small pieces using scissors, a knife, or a cutter. This will make it easier to separate the gold from the plastic and other materials. Dissolving the gold and other metals from the SIM card pieces using a solution of hydrochloric acid and hydrogen peroxide.
Gold appeared in greater quantities in consumer electronics when printed circuit boards arrived in roughly the mid-1960s. That explains why you will find quantities of recyclable gold in radios, remotes, stereo components and televisions made since then – and hardly any in older electronic equipment.
Televisions: Old CRT (cathode-ray tube) TVs contain significant amounts of gold on their circuit boards and connectors.
Use Nitric Acid
Nitric acid also comes in handy when we want to remove gold foil from circuit boards. The acid will melt down the metallic circuit board parts, and the non-metallic components will remain intact. Also, with nitric acid, it is important to use protective equipment for your safety.
From microscopic bonding wires inside chips to visible gold plated connectors and contact pads, gold plays a critical role across nearly every section of a motherboard. Even though the amount of gold in a single motherboard is small, its presence is essential for stable operation, especially over many years of use.
Thin quad IC chips have a good amount of #gold in them - and since they're low profile and require less acid, it's easier to extract gold from 'em compared to traditional chunky IC chips.
It's also not including the cost to remove it. Other sources estimate that the average computer contains 1/5th gram of gold, which is worth about $12. Laptops, on the other hand contain around 1/10th gram or $6 in gold.
According to my knowledge, you can get 15.5 grams of gold from 1 kilogram of rams. This is because the gold content in rams is about 0.155%, which means that there is 15.5 milligrams of gold in every gram of rams. So, if you have 1 kilogram of rams, which is equal to 1000 grams, you will have 15.5 grams of gold.
It's true there's often silver, platinum, palladium and gold in our damaged or outmoded electronics, not to mention plastic, glass and other materials that have some scrap value. The primary reason is that precious metals conduct electricity much better than alloys.
The dirty gold jewelry on your nightstand to outdated electronics in your attic contain precious scrap gold and silver. The most common household items, including watches, circuit boards, and dental fillings, have minute but worthwhile amounts of precious metal that accumulate over the years.