Measure a quarter cup of baking soda, add roughly 50ml of warm water and proceed to mix until it is a paste. Then, with a wet towel, wipe the seat and apply the paste to the stained surfaces.
Hard water
As the toilet flushes, the water can splash upwards onto the underside of the seat, and as the water evaporates, it can leave behind mineral deposits (limescale). As it builds up, limescale can develop a yellow tinge that can end up damaging the surface of the plastic and causing staining.
To clean your toilet seat, we recommend using mild hand soap and water. Anti-bacterial hand soap, dish soap, or anti-bacterial wipes are also acceptable – using any of these will preserve your toilet seat's glossy finish. If you use wipes, please make sure to thoroughly dry the ring and cover with a paper towel.
“I used baking soda and enough white vinegar to form a paste, then smeared it all over the surface. “I left it to sit for around 30 minutes and then used a microfibre cloth to wipe it away using circular motions. “I've never seen my toilet seat so clean, it's like brand new.”
“I'm going to get some hate for this, but you're not meant to use bleach to clean your toilet! “All new toilet pans have an antibacterial coating on them, the bleach ruins it. “As for the seat, the material has now been compromised and once the air hits it after cleaning with bleach, it reacts and turns yellow.
Cathleen Nic Giolla said: “Form a paste with white vinegar and baking soda. Apply to toilet seat and scrub off with the rough side of a sponge. “For stubborn stains leave the paste on for around 10 minutes. Worked wonders for our toilet seat, when even bleach wouldn't take it off.
Answer. Well water with very high iron and sodium hypochlorite bleach are just not very compatible. The bleach active reacts with the iron and changes it to the chemical form as rust. This new yellow/red discoloration then deposits on clothes, causing discoloration.
But you can clean toilet stains with clever (and common) household potions like vinegar and baking soda. After a good scrub, regular maintenance should slow that menacing stain buildup and leave you with a sparkling throne.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well.
Pour straight peroxide in a container. Put the plastic in the container. Allow the plastic to soak in the sunlight until the stain lifts. Rinse and dry.
Urine scale and limescale leave visible deposits in the toilet. Whereas limescale is a mineral, urine scale contains several mineral salts. The waste in urine contains phosphorus, potassium, sodium, calcium and magnesium. These substances produce brown or yellow stains in the toilet bowl.
While you can use bleach to completely sanitize your toilet bowl as part of a mixture, it is not recommended for your toilet tank as it can ruin the inside of the tank.
Use bleach - Bleach is easily available and is used as a whitening product. Mix 1 cup of bleach in 1 cup of water. Apply this solution pon your plastic items and let it sit for two hours. After this, you can rinse the plastic with soap and water thoroughly.
Over time, plastics may turn yellow. This is usually due to an increased exposure to ultraviolet light, but it can also be due to excess heat, humidity, the cold, and other extreme temperatures and environments.
Add 1-2 cups of white vinegar to the bowl and leave it in the toilet for 20-30 minutes. After this, gently scrub the walls of the toilet with the brush or sponge and rinse the white vinegar and baking soda away with water. This cleaning method should take care of your stains.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
If you need to clean the toilet quickly and you're out of cleaner, squirt a bit of toothpaste into the bowl. Grab the toilet brush and scrub away. The paste will remove stains and leave a fresh odor. It won't disinfect the toilet to get rid of bacteria, but it will work in a pinch.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
It's the exact same substance, just with a different name. So when you see the words 'baking soda' in an American cleaning recipe then go ahead and use bicarbonate of soda. The results will be exactly as intended.
Towels can turn yellow over time, depending on the frequency of use. Factors such as the sauce contaminated from your hands while cooking in the kitchen, sweat from your face or skin, dead skin spilled from the skin, oil on the skin or hair play a big role in the yellowing of the towels.
Does white vinegar remove yellow stains? It does indeed! Mix it with equal parts water to create a great at-home spray to use on yellowed clothing.
Rather than staining white clothes, bleach can leave a yellow residue. Removing this yellow stain is pretty simple with some white vinegar. Rinse the fabric for several minutes. Put straight white vinegar on the yellow stains.