Placing the router inside is recommended if at all possible. Not only will the Wifi signal work better with the router placed indoors, it's also much better protected from the elements. Starlink recommends placing the router indoors, even though it's designed with dust and water resistance.
Ideally, the router should be placed in an open area with as few obstructions as possible, such as walls or furniture. Additionally, the router should be placed away from electronics, such as TVs and microwaves, that may interfere with the signal.
Second-generation Starlink routers are rated to withstand the same weather conditions as their accompanying Starlink dish, so they can be installed outside as long as its operating temperatures are within limit.
Weather resistant
Designed and rigorously tested to handle a wide range of temperatures and weather conditions, Starlink is proven to withstand extreme cold and heat, hail, sleet, heavy rain, and gale force winds – and it can even melt snow.
The router is designed to receive signals from the Starlink satellites, which orbit at an altitude of around 340 miles. This means that the router has a range of up to around 600 miles in all directions, depending on the location of the user.
Setting up a mesh network to extend the range of your Starlink router has become a popular way to get more coverage out of your home wifi network. A mesh network allows a router to communicate with multiple nodes, essentially creating a web of wifi coverage throughout a space.
How many devices can Starlink handle at one time? As standard, Starlink can support up to 200 devices but with ClubWiFi's network technology this can be considerably increased to up to 8000 devices securely on a public network.
The Standard Starlink is designed for portable use at any destination where Starlink has active coverage. With an easy setup and break down, Starlink delivers high-speed, low-latency internet access within minutes, and packs up quickly when it's time to move to your next destination.
The installation team will need to install the necessary hardware and software at the new address in order to move the service. Once the installation is complete, customers will need to contact Starlink customer service again to confirm the service move.
You will not be able to cut or extend the Starlink cable yourself. Should you want to 'plug in' a device to the system with a cable, such as a Laptop, you will need to order the Starlink 'Ethernet Adapter' which can be ordered only from their website.
Other options include drilling a hole through an exterior wall. Starlink sells accessories for routing cable through standard walls and another for bypassing masonry or concrete. Once you get the cable into your home, you need only plug it into the Wi-Fi router.
Do You Need to Drill a Hole to run Starlink cable? The Starlink cable has a large ferrite-like protection. Therefore, you'll need to drill a hole. And if you're running it in through a vent, you might have to drill out a part of the vents for the cable to fit.
Can't I just put it in the attic? In general, the answer is no. It may seem like it makes sense to put your router somewhere in the attic that's more centrally located, but there are several issues with that.
Which way should my Starlink face? Ideally, Starlink Dishes should be directed towards the North in the Northern hemisphere and towards the South in the Southern Hemisphere. Nevertheless, once you set the direction and power up the Dish, it will automatically align the angle of view to connect with Starlink satellites.
Power cycle the Starlink router
If you don't use the app, or you just don't want to mess with a software reboot, the next option is to manually power cycle the Starlink system by unplugging the router. The router is also the power supply for the dish. Unplugging the AC power cord will turn off the router and the dish.
Starlink RV: RV service can only be used within the same continent as the shipping address on the Starlink account. So if you order Starlink RV and have it shipped to the US, you could use it in all of North America, but not in Europe.
Starlink internet is delivered as a self-installation kit that includes a router. If you want to know if you need to use a router at all, then the answer is yes.
Starlink's Power Consumption
Your standard Starlink router (along with the antenna and power cables) uses an average of 50-75W when active (i.e., when connected to LEO satellites) and around 20W when connected to the internet without network activity, as reported by Starlink Hardware.
The Starlink router covers 2,000 square feet, which can be further extended through the purchase and installation of Starlink mesh nodes.
Those needs could include anything from wanting faster speeds and greater ranges all the way to setting up a static IP. In any case, putting your Starlink router into Bypass mode is required.
It just sits between the router and the dish, and gives you one Ethernet port.
The Wi-Fi signal from the integrated Starlink router can travel up to 200 feet in a straight line, or roughly 75 feet when passing through typical building materials. Starlink routers' WiFi signals can be amplified in several ways to cover more ground.
Yes you should be able to have a separate network name and password attached to the secondary router. Thanks for the reply! I was able to get two networks setup using two routers by using the LAN port on the back of one. This setup works fine however you can ping the other devices so it's not totally secure.