Baking soda is great for cleaning all types of jewelry, including diamond jewelry. Mix a cup of hot water with 1-2 teaspoons of baking soda. Place the jewelry in the mix for a few minutes. Rinse, and pat dry with a clean cloth.
You can also buy a jewellery cleaning solution from your local jeweller. Do not use toothpaste, baking soda or any other such products to clean your jewellery.
There are many common cleaning products that people may think are good to clean diamond rings with, but they can actually be quite damaging. Chlorine bleach, abrasives (like toothpaste or baking soda), or acetone should never be used on any jewellery.
"The best way to clean diamond rings is to make a solution with warm water (almost hot) and dishwashing soap. Soak your ring for about 20 to 40 minutes, gently brush the stone with a very soft toothbrush, and then rinse under warm running water," advises Mann. "If needed, repeat."
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
The cheapest and easiest way to clean platinum rings is by soaking them in a sudsy solution of warm water and a mild washing up liquid for around 30 minutes. This will lift any built-up grime and debris from your rings, effortlessly restoring their lustre.
Pour half a cup of white vinegar to into the pan. The vinegar will activate the base solution and cause the it to begin bubbling. Leave the platinum in the bubbling solution for five to ten minutes. Rinse and dry your platinum.
Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours. Rinse the ring in cold water and either let it air dry or wipe it gently with a soft cloth.
The short answer is no. Toothpaste is not a good option for cleaning your ring. Toothpaste contains scrubbing particles to polish your teeth, but these particles are often harder than the metals in your ring, especially gold or white gold. Using toothpaste on your jewelry could cause scratches or pitting in the metal.
Baking soda is abrasive, which is why it's great for cleaning sinks and toilets, but that abrasive quality can scratch gemstones and precious metals. So steer clear when it comes to cleaning jewelry.
Jewelers use ultrasonic cleaners with high frequency sound waves and chemicals, which create bubbles that latch on to the dirt on the diamond. The high frequency sound waves pull the dirt away from the stone and bring them up to the surface.
1) To regularly clean jewelry, soak your jewelry in a baking soda-soapy water solution, mix 1 cup (240 ml) of warm water with 1–2 tsp (4.8–9.6 g) of baking soda and a squirt of dish soap for 20 minutes. 2) Then, rinse your jewelry clean with running, cool water, making sure to remove all baking soda residue.
You can clean a ring with Windex if it just has diamonds set in a gold, silver, or platinum setting.
Mix two parts baking soda with one part water to make a paste, then gently rub the mixture onto the jewelry. Let the paste dry completely to remove the tarnish.
The best way to clean your diamond jewelry and restore its sparkle is to: Spray a soft-bristled toothbrush with Windex and gently brush diamond jewelry thoroughly, removing any dirt on the surface of the diamond or dirt that has settled in and around the metal.
Classic Clean
All you have to do is put a few drops of dish soap into a bowl with two to three cups of water. Leave your jewelry in the bowl for 20 to 40 minutes, take them out for a non-abrasive brush (a soft-bristled toothbrush does the trick). To finish, rinse and then dry them with a microfiber cloth.
Despite its ruggedness, diamond can lose its sparkle with oil or dust deposited on it. To maintain the sparkling of this indestructible gemstone is a tough job, but a possible one!
Clean your platinum jewellery using a solution of warm soapy water. A soft-bristle toothbrush or soft cloth should be used to gently scrub the jewellery clean. For drying, use a lint-free cloth. When not being worn, store platinum jewellery separately from other jewellery pieces to prevent scratching.
Put your ring in boiling water for approximately 10 minutes, After 10 minutes, take out the ring using any item to grip it and let it cool down, Clean the ring softly with a toothbrush and put it back in the same solution for 5 minutes, Take out the ring from the solution and wash it with plain water.
Would coke be ok on that? Thanks for all the responses. Yep cokes fine on platinum I use it on mine!
Over time, platinum will fade in a different way. It won't turn yellow, like yellow gold; but, it will begin to lose its shiny finish and build a natural patina (more on this in a bit). Some people actually prefer this look because it will accentuate the brilliance of a diamond and make it appear more sparkly.
Diamonds gain their characteristic sparkle by using lasers to scrape away their dull, rough outer surface and create and polish angled facets that allow them to sparkle.
A diamond that has not been cleaned for a while can look milky due to a buildup of film and dirt on its facets. Cloudy diamonds can also have diminished transparency from inclusions or other characteristics intrinsic to the crystal from which they are cut.