Because the Starlink phased array antenna has a wide field of view to track satellites, any trees or other obstructions will cause performance issues. You'll need to find a suitable location by using the Starlink app to check for obstructions.
Overall, if you have minor obstructions that read between 1-5%, Starlink should still work fine for most internet activities.
Check for Obstructions Feature on the Starlink App. Now that we have established that obstructions and opaque objects hinder signal reception on Starlink, let's look at how to prevent such inconsistencies. Fortunately, Starlink does provide users with a way to check and avoid obstructions through the Starlink app.
Starlink required field of view of the sky /siting your Starlink. Starlink requires a 100 degree cone unobstructed view of the sky. This figure should improve (i.e. the requirement may well drop to less than 100 degrees) as more satellites are put into orbit.
Run the Cable
For my initial setup, I simply led the cable through an open window: It's a simple (and temporary) solution, but it works fine.
Rain. Rain can interrupt the Starlink satellite signal. Light rain doesn't usually cause issues, but heavy downpours can knock out your signal until the rain eases up. Whether or not rain affects the connection is based on how dense the moisture is.
Starlink recommends placing the router indoors, even though it's designed with dust and water resistance. If you need to install the router outside, here are a few things to consider: Weather – The environment needs to stay within the Starlink routers operating temperature range of -22°F to 122°F (-30°C to 50°C).
Unlike other satellite receiver systems in Australia, where the receiver faces a northerly direction. The Starlink receiver dish must be facing south. So before you decide to purchase this service, use the Starlink App to see if the receiver dish will have a clear line of sight to the southern sky.
What Direction Should Starlink Dish Face? Mostly up. While the exact direction that a Starlink satellite dish should face will depend on where you are located, it will most likely need to be pointing somewhere between 15 and 35 degrees from being pointed straight up and angled to the north.
First, drill a one-inch hole using the appropriate drill bit. Next, from inside your house, feed one end of the ethernet cable (the one you'll attach to the dish) through the hole. Next, seal the holes to protect the wood, brick, or metal. After that, use hooks to route the cable to the dish.
A Guide to Finding the Perfect Spot for Your Starlink Router
The router needs to be placed in an open area, with no walls, furniture, or other objects blocking it. This will ensure that the signal is strong and able to reach its intended destination.
Satellites in low Earth orbit, including Starlink, also cause radio interference with sensitive astronomical instruments. But it is their contribution to the artificial brightness of the night sky (“skyglow”) – adding to light pollution from the illumination of the world's cities – that has astronomers most worried.
In the peak internet usage hours of the day, between 5pm-10pm, you may notice your speeds slow way down. This is caused by too many Starlink customers in your area trying to connect at the same time.
The primary disadvantage of Starlink is its high latency. This means that data takes longer to travel from the user to the satellite and back, resulting in slower connection speeds.
Hum from onboard electronics that power SpaceX's internet-beaming Starlink satellites may disturb radio astronomy observations, a new study has found. Experts have long warned about how astronomy is being impacted by megaconstellations of low Earth orbit satellites such as SpaceX's Starlink.
Optimal Starlink Mounting Position
The optimal placement of the Starlink dish is somewhere near the peak of your roof, which is likely to be the highest mounting location available to you.
If you need to elevate your Starlink dish, a number of mounting options are available to help. Whether you want to put your dish on your roof, on the side of your house, or even in the middle of a field, here are the accessories that let you do it.
You can simply pack up your Starlink kit, set it up at your new address, and continue using the service as usual. However, it's essential to update your service address in your Starlink account to ensure that the dish can properly communicate with the satellites and provide optimal performance.
I recommend stowing the dish, then moving it. Once moved, unplug from power and plug back in for the boot sequence to begin. If you move your dish with it being online, it will notice it's being moved and send an alert to the app/router and then the service goes offline temporarily.
How far can the Starlink dish be from house? The Starlink dish can be up to 150 feet from the house if you purchase the 150 ft extension cable from Starlink. The included cable is 50 ft.
The router is designed to receive signals from the Starlink satellites, which orbit at an altitude of around 340 miles. This means that the router has a range of up to around 600 miles in all directions, depending on the location of the user.
SpaceX's Starlink internet is a low Earth orbit (LEO) satellite internet provider from the mind of Elon Musk. Starlink internet offers unlimited data, above broadband speeds for most of its plans, and less latency than most satellite internet providers.
Sure, you can leave your Dishy sitting on the ground outside of your rig, but this leaves it susceptible to theft, not to mention the animals that might try to mess with it. Considering the Starlink hardware costs around $500, having something happen to a satellite dish would obviously be terrible.
SpaceX specifically designed the Starlink satellite dish to be able to withstand rain, snow and cold. There's even a heater inside the dish itself so that it melts any ice surrounding it.