In short, it is possible to connect the toilet drainage line and the shower drainage line, as long as they both have separate waste trap arms. However, do note that combining them may also lead to blockages, which can cause smells to come from certain drains.
Wet vents are typically used when plumbing a bathroom group. So yes the shower can also be vented by the wet vent along with the toilet. There is one major stipulation when wet venting multiple fixtures when a toilet is one of them: the toilet must be the last fixture connected to the wet vent.
The most common reason for sewage coming up through your bathtub is a clogged sewer line. All the sinks, toilets, and tubs connect to a single drain pipe that leads to the sewer line under your house. This drain line carries all wastewater and sewage away from your home to the city's sewer system.
Toilets need to be supplied with water, so placing yours where the shower was means that's easy to do. Grab some PEX pipe and connect it to the cold water supply, and pipe it to where the toilet will now be placed. The pipes will run between the wall, and finish it off with a turn valve.
Code Requirement: A minimum distance of 15 inches is required from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle.
'It is recommended that you have at least an 18-inch gap at the side of a toilet and 30 inches in front so that it is easy to clean and use. When it comes to the gap between a shower and toilet, you need to make sure that whoever is using the shower can do so safely and comfortably.
You see, every drain in your home is connected to a pipe that moves used water from your house to a sewer in the street; that's right, every toilet, shower, sink, washing machine, dishwasher, and anything else that uses water connects to one singular pipe.
Each house on the street has its own pipes and drains, which directly connect the property to the central shared drain. Waste is discharged from your home and makes its way to the shared drain.
If your toilet backs up into your shower or bathtub, it can be a bleak reminder that the two systems are connected. If several kitchen and bathroom sinks, showers, toilets and other drains to the sewage system are backing up, then you might have a blockage in your main sewer line.
Common vent
This very simple concept allows two traps to be vented by the same vent. The two traps and their fixture drains can be either at the same level or at different levels, provided that they are on the same floor.
You'd often blow air from one bathroom into the other, and local building inspectors wouldn't approve it. But while you can't have two fans with one vent, you can make one fan and one vent serve two bathrooms.
When the shower and toilet are both clogged, the obstruction will likely be downstream from the area where the shower and toilet connect with the underlying sewer main. Such simultaneously clogging is a sign the obstruction is so deep that it backs up both drains. There is no sense running water throughout your St.
If it's private, it's your responsibility, and any shared drains mean you'll need to contact your neighbours as you'll all cover the costs. If it's public, then the local water authority handles any shared drains, and anything beyond your property boundary.
1:Can multiple bathroom sinks, baths, showers ect share a common drain pipe ? Yes they can and do all the time.
You generally have two options when it comes to finding the drainage system beneath your property. You can reach out to your local council and ask them to send you your drainage plan. The other option is to contact your local drainage experts and ask them to map your drains.
So, when you flush the loo, have a shower or turn on your dishwasher, we make sure that all that used water - now called 'sewage' or 'wastewater' - is safely collected and transferred to treatment plants via the sewerage system.
The toilet – got to be practical folks
Make sure you space it at least 450mm off an adjacent wall to the centre of the toilet. That means you need a gap of at least 900mm between walls. If it is up against a vanity you can reduce this to 400mm seeing as the vanity doesn't stick out as far as a toilet.
Any sidewall or nearby fixture must be at least 15" away from the toilet's flange. However, 15" is the absolute minimum. A 15-inch distance from the vanity, shower, tub and back and side walls are required to accommodate the toilet flange.
Toilet supply line (horizontal): Horizontally, the water supply line is measured from the centerline running vertically through the center of the toilet. The water supply line hole should be 6 inches to the side of the centerline. Check the toilet to confirm the location water supply connection.
Contacting a plumber is the best option if you suspect a shower drain is clogged. Plumbers have the professional tools and equipment to not only remove the blockage, but do so with minimal harmful chemicals while also preventing future blockages by thoroughly cleaning the pipes.
It does not require a separate circuit for each bathroom. One circuit may supply multiple bathrooms as long as only bathroom receptacles are supplied. Lighting outlets or receptacle outlets in other rooms may not be supplied by this circuit.