Measure a quarter cup of baking soda, add roughly 50ml of warm water and proceed to mix until it is a paste. Then, with a wet towel, wipe the seat and apply the paste to the stained surfaces.
Add 1-2 cups of white vinegar to the bowl and leave it in the toilet for 20-30 minutes. After this, gently scrub the walls of the toilet with the brush or sponge and rinse the white vinegar and baking soda away with water. This cleaning method should take care of your stains.
Make a paste by mixing 1/2 cup of Borax and enough vinegar to form a thick paste. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. The Borax will harden quickly so don't add the vinegar until you are ready to apply the paste.
Cathleen Nic Giolla said: “Form a paste with white vinegar and baking soda. Apply to toilet seat and scrub off with the rough side of a sponge. “For stubborn stains leave the paste on for around 10 minutes. Worked wonders for our toilet seat, when even bleach wouldn't take it off.
But you can clean toilet stains with clever (and common) household potions like vinegar and baking soda. After a good scrub, regular maintenance should slow that menacing stain buildup and leave you with a sparkling throne.
Calcium build-up – Ordinarily, yellow stains are limescale formations. They are caused by hard water – it's rich in minerals, which accumulate over time and become visible inside the toilet bowl. Eventually, these minerals can even accumulate in your pipes, causing a toilet block.
“I'm going to get some hate for this, but you're not meant to use bleach to clean your toilet! “All new toilet pans have an antibacterial coating on them, the bleach ruins it. “As for the seat, the material has now been compromised and once the air hits it after cleaning with bleach, it reacts and turns yellow.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well.
For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
Clorox Toilet Bowl Cleaner with Bleach
This gel toilet bowl cleaner from Clorox is our top pick, because it's affordable and super effective. Since it contains bleach, it's tough on everything—stains, odors, and bacteria.
To clean your toilet seat, we recommend using mild hand soap and water. Anti-bacterial hand soap, dish soap, or anti-bacterial wipes are also acceptable – using any of these will preserve your toilet seat's glossy finish. If you use wipes, please make sure to thoroughly dry the ring and cover with a paper towel.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Clean the toilet bowl
The fizzy drink can actually remove hard-to-clean stains on the inside of a toilet bowl. You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating.
Simply measure out half a cup's worth of bleach and pour it into your toilet bowl, using your toilet brush to scrub it into the bowl and beneath the bowl's rim, also allowing five minutes to pass before you flush it all away.
Odor Toilet Tank FAQ
White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
"The biggest don't when it comes to toilet tanks is bleach — do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet," says Patty Stoffelen, a bath fixtures merchant for The Home Depot to Martha Stewart.
4: Leave the Bleach to Work for 5 Minutes
To avoid damaging the toilet, you should only leave the bleach in the toilet for 5 minutes – 15 minutes at the most.
Although you're not often aware of them, the water jet openings on the underside of a toilet rim can become dirty and clogged with bacteria and mineral deposits. Colonies of bacteria forming there can become a health concern, and mineral deposits clogging the toilet jets can interfere with the flow of water.
Urine is denser than water, so it will naturally sink to the bottom of the toilet. This is because the solutes in the urine are denser than the water, causing it to be heavier than the water and sink.
White crusty deposits that may accumulate around the toilet bowl, the end of a faucet or showerhead or appear as water spots come from water rich in the naturally-found calcium or magnesium minerals often referred to as water hardness. Water that is high in alkalinity or silica may also create this accumulation.